Straight-Flute Drill Design Highlights
- Цвёрдацвёрдасплавная канструкцыя
- Oerlikon Coating Technology
- 120° Point Angle Design
- Straight Flute Geometry
- Reinforced Web Core
- Optimized cutting edge
Straight-Flute Drill Bit Types

3×D Straight-Flute Drill Bits
Designed for shallow hole drilling with high tool rigidity and precision.

П: Сталь
M: Нержавеючая сталь
K: чыгун
N: Non-ferrous
Oerlikon HELICA Coating
2 Flutes
3×D
External coolant design
Internal Coolant Design
120° Point Angle
DIN 6535-HA
Straight Shank
Drilling
Right-Hand Cutting
Цвёрдацвёрдасплавная канструкцыя
M7

5×D Straight-Flute Drill Bits
Suitable for drilling shallow to medium deep holes with improved hole accuracy.

П: Сталь
M: Нержавеючая сталь
K: чыгун
N: Non-ferrous
Oerlikon HELICA Coating
2 Flutes
5×D
External coolant design
Internal Coolant Design
120° Point Angle
DIN 6535-HA
Straight Shank
Drilling
Right-Hand Cutting
Цвёрдацвёрдасплавная канструкцыя
M7

8×D Straight-Flute Drill Bits
Specialized for drilling deeper holes with consistent hole straightness.

П: Сталь
M: Нержавеючая сталь
K: чыгун
N: Non-ferrous
Oerlikon HELICA Coating
2 Flutes
8×D
External Coolant Design
Internal Coolant Design
120° Point Angle
DIN 6535-HA
Cylindrical shank
Drilling
Right-Hand Cutting
Цвёрдацвёрдасплавная канструкцыя
M7
Why Choose Our Straight-Flute Drills?
For our D7200 series straight-flute drills for cast iron, JINOO has optimized the straight flute design to achieve high-stability drilling.

Цвёрдацвёрдасплавная канструкцыя
Our straight-flute drills are manufactured from 0.4 μm fine-grain carbide substrates with uniform structures.

Oerlikon Coating Technology
Our straight-flute drill bits can be combined with advanced HELICA coating technology from Oerlikon.

120° Point Angle Design
The 120° point angle enables high-stability entry of straight-flute drills.

Straight Flute Geometry
The straight flute is designed for superior chip control in machining short-chip materials.

Reinforced Web Core
The reinforced web core can improve tool rigidity and cross-sectional strength.

Optimized Cutting Edge
Honed cutting edges can promote edge consistency of straight-flute drills.
Straight-Flute Drill Geometry Breakdown
1.0.4 μm Fine-Grain Carbide Substrate for Higher Durability
Featuring 0.4 μm ultra-fine grain carbide substrates with optimized microstructure, straight-flute drills have superior resistance to tool wear and edge deformation.
2.HELICA Coating for Reduced Friction
Oerlikon coatings can minimize heat generation and chip adhesion with a low coefficient of friction, enabling smooth chip flow and less flank wear.
3.120° Point Angle for Accurate Positioning
120° drill point angle can optimize the cutting force distribution and promote superior positioning accuracy.
4.Honed Cutting Edges for Edge Strength
Two main cutting edges with controlled edge radius can balance sharpness and cutting stability with minimal edge chipping.
5.Straight-Flute Geometry for Structural Strength
Straight flute design with a larger core section features high strength to avoid tool breakage and enhance drilling stability.
6.Reinforced Core for Superior Rigidity
The reinforced core structure can improve tool rigidity and torsional stiffness to decrease tool vibration and tool breakage.
7.Reduced Chisel Edge for Less Thrust Force
A shortened chisel edge can decrease axial thrust force and increase centering capability with less tool vibration.
8.Precisely-Ground Margin for Hole Accuracy
The precision ground margin can minimize frictional contact to improve the hole roundness and dimensional accuracy.

Тэхнічныя дадзеныя
| Ultra-fine Grain Substrate | 0.4μm |
| Tolerance | M7 |
| Пакрыццё | AlTiN + TiSiN / TiAlSiN-X / AlTiN / TiAlN / TiAlSiN / DLC / AlCrN / AlCrSiN / AlTiSiN / TiSiXN / Customized Available |
| Нумар флейты | 2 |
| Агульная даўжыня | 50 / 60 / 75 / 100 / 150 / 200mm / Customized Length |
| Дыяметр хваставіка | 4 / 6 / 8 / 10 / 12 / 14 / 16/ 18 / 20mm / Customized Diameter |

Straight-Flute Drills Specifications
Straight-flute carbide drill sizes with 5xD drilling depths are available.
Табліца памераў
Карбідная падкладка
Кіраўніцтва па хуткім выбары
Cutting Parameters
| Code | Diameter (mm) | Diameter (in) | Shank Diameter (in) | Overal Length OAL(in) | Flute Length (in) | Max Cutting Depth (in) | Shank Length (in) | |
| Знешняя астуджальная сістэма | Унутраная астуджальная сістэма | |||||||
| D7203-NHA-D03175 | D7203-CHA-D03175 | 3.175 | 0.125 | 6 | 62 | 20 | 14 | 36 |
| D7203-NHA-D03571 | D7203-CHA-D03571 | 3.571 | 0.1406 | 6 | 62 | 20 | 14 | 36 |
| D7203-NHA-D03970 | D7203-CHA-D03970 | 3.97 | 0.1563 | 6 | 66 | 24 | 17 | 36 |
| D7203-NHA-D04366 | D7203-CHA-D04366 | 4.366 | 0.1719 | 6 | 66 | 24 | 17 | 36 |
| D7203-NHA-D04763 | D7203-CHA-D04763 | 4.763 | 0.1875 | 6 | 66 | 28 | 20 | 36 |
| D7203-NHA-D05159 | D7203-CHA-D05159 | 5.159 | 0.2031 | 6 | 66 | 28 | 20 | 36 |
| D7203-NHA-D05558 | D7203-CHA-D05558 | 5.558 | 0.2188 | 6 | 66 | 28 | 20 | 36 |
| D7203-NHA-D05949 | D7203-CHA-D05949 | 5.949 | 0.2344 | 6 | 66 | 28 | 20 | 36 |
| D7203-NHA-D06350 | D7203-CHA-D06350 | 6.35 | 0.25 | 8 | 79 | 34 | 24 | 36 |
| D7203-NHA-D06746 | D7203-CHA-D06746 | 6.746 | 0.2656 | 8 | 79 | 34 | 24 | 36 |
| D7203-NHA-D07145 | D7203-CHA-D07145 | 7.145 | 0.2813 | 8 | 79 | 41 | 29 | 36 |
| D7203-NHA-D07541 | D7203-CHA-D07541 | 7.541 | 0.2969 | 8 | 79 | 41 | 29 | 36 |
| D7203-NHA-D07938 | D7203-CHA-D07938 | 7.938 | 0.3125 | 8 | 79 | 41 | 29 | 36 |
| D7203-NHA-D08344 | D7203-CHA-D08344 | 8.334 | 0.3281 | 10 | 89 | 47 | 35 | 40 |
| D7203-NHA-D08733 | D7203-CHA-D08733 | 8.733 | 0.3438 | 10 | 89 | 47 | 35 | 40 |
| D7203-NHA-D09129 | D7203-CHA-D09129 | 9.129 | 0.3594 | 10 | 89 | 47 | 35 | 40 |
| D7203-NHA-D09525 | D7203-CHA-D09525 | 9.525 | 0.375 | 10 | 89 | 47 | 35 | 40 |
| D7203-NHA-D09921 | D7203-CHA-D09921 | 9.921 | 0.3906 | 10 | 89 | 47 | 35 | 40 |
| D7203-NHA-D10320 | D7203-CHA-D10320 | 10.32 | 0.4063 | 12 | 102 | 55 | 40 | 45 |
| D7203-NHA-D10716 | D7203-CHA-D10716 | 10.716 | 0.4219 | 12 | 102 | 55 | 40 | 45 |
| D7203-NHA-D11111 | D7203-CHA-D11111 | 11.111 | 0.4375 | 12 | 102 | 55 | 40 | 45 |
| D7203-NHA-D11509 | D7203-CHA-D11509 | 11.509 | 0.4531 | 12 | 102 | 55 | 40 | 45 |
| D7203-NHA-D11908 | D7203-CHA-D11908 | 11.908 | 0.4688 | 12 | 102 | 55 | 40 | 45 |
| D7203-NHA-D12300 | D7203-CHA-D12300 | 12.3 | 0.4843 | 14 | 107 | 60 | 43 | 45 |
| D7203-NHA-D12700 | D7203-CHA-D12700 | 12.7 | 0.5 | 14 | 107 | 60 | 43 | 45 |
| D7203-NHA-D13100 | D7203-CHA-D13100 | 13.1 | 0.5157 | 14 | 107 | 60 | 43 | 45 |
| D7203-NHA-D13891 | D7203-CHA-D13891 | 13.891 | 0.5469 | 14 | 107 | 60 | 43 | 45 |
| D7203-NHA-D14288 | D7203-CHA-D14288 | 14.288 | 0.5625 | 16 | 115 | 65 | 45 | 48 |
| D7203-NHA-D14684 | D7203-CHA-D14684 | 14.684 | 0.5781 | 16 | 115 | 65 | 45 | 48 |
| D7203-NHA-D15083 | D7203-CHA-D15083 | 15.083 | 0.5938 | 16 | 115 | 65 | 45 | 48 |
| D7203-NHA-D15479 | D7203-CHA-D15479 | 15.479 | 0.6094 | 16 | 115 | 65 | 45 | 48 |
| D7203-NHA-D15875 | D7203-CHA-D15875 | 15.875 | 0.625 | 16 | 115 | 65 | 45 | 48 |
| D7203-NHA-D17463 | D7203-CHA-D17463 | 17.463 | 0.6875 | 18 | 123 | 73 | 51 | 48 |
| D7203-NHA-D19050 | D7203-CHA-D19050 | 19.05 | 0.75 | 20 | 131 | 79 | 55 | 50 |
| Памер зерня | Асаблівасць | Падыходныя матэрыялы | Перавага |
| 0,2 мкм | Ультрадробнае зерне, надзвычай высокая цвёрдасць, вельмі востры рэжучы край | Загартаваная сталь (HRC60+), нержавеючая сталь, тытанавыя сплавы, інструменты мікрадыяметра | Выдатная зносаўстойлівасць і вастрыня краю, ідэальна падыходзяць для высокадакладнай аздаблення, але меншая трываласць |
| 0,4 мкм | Ультрадробнае зерне, выдатны баланс цвёрдасці і трываласці | баланс цвёрдасці і трываласці Загартаваная сталь, нержавеючая сталь, легаваная сталь, дакладная форма для сталі | Высокая зносаўстойлівасць з добрай стабільнасцю рэжучай кромкі, падыходзіць для чыставой і паўчыставой апрацоўкі |
| 0,6 мкм | Дробназерністая, збалансаваная прадукцыйнасць | Вугляродзістая сталь, легаваная сталь, нержавеючая сталь, чыгун (агульныя ўмовы) | Добры баланс зносаўстойлівасці і трываласці, універсальны клас агульнага прызначэння |
| 0,7 мкм | Сярэдне-дробназерністая, палепшаная трываласць | Агульная сталь, нізкалегіраваная сталь, рэжымы перапыненага рэзання | Палепшаная ўстойлівасць да сколаў, падыходзіць для паўчарнавой апрацоўкі і няўстойлівага рэзання |
| 0,8 мкм | Сярэднязерністасць, высокая трываласць | Нізкавугляродзістая сталь, грубая апрацоўка, цяжкае перапыненае рэзанне | Высокая ўдаратрываласць, падыходзіць для чарнавой апрацоўкі і патрабуе стабільнасці рэзання |
| Матэрыялы | Матэрыялы апрацоўваемых дэталяў | Тып | |
| ІСО | |||
P | П1 | Аўтарэзная сталь | D2100 / D2200 / D2300 / D2400 / D2600 / D3000 / D5200 / D9100 |
| П2 | Нізкавугляродзістая сталь (C<0.25%) | ||
| П4 | Сярэдневугляродзістая сталь (0.25%), Нізкалегаваная сталь | ||
| П5 | Легаваная сталь, загартаваная і адпаленая сталь | ||
| П6 | Высокавугляродзістая сталь (C>0.6%) | ||
| П11 | Ферытная нержавеючая сталь, мартенсітная нержавеючая сталь | ||
H | H5 | Загартаваная і адпаленая сталь | D2100 / D2200 / D2300 / D2400 / D2600 / D3000 |
| H7 | Падшыпніковая сталь | ||
| H8 | Інструментальная сталь, хуткарэзная сталь | ||
| H12 | Загартаваная нержавеючая сталь | ||
| H21 | Ацынкаваная сталь | ||
M | М1 | Аўстэнітная нержавеючая сталь | D2100 / D2200 / D2400 / D2600 / D3000 / D5200 / D9100 |
| М2 | Высокатрывалая аўстэнітная нержавеючая сталь | ||
| М4 | Дуплексная нержавеючая сталь | ||
S | С1 | Суперсплав на аснове жалеза | D2600 / D9100 |
| С2 | Суперсплав на аснове кобальту | ||
| С3 | Суперсплав на аснове нікеля | ||
| С11 | Тытанавы сплаў (нізкалегаваны) | ||
| С13 | Тытанавы сплаў (высокалегаваны) | ||
K | К1 | Шэры чыгун | D2100 / D2200 / D2300 / D2400 / D3000 / D5200 / D7200 / D9100 |
| К2 | Ушчыльненае графітавае жалеза (CGI) | ||
| К3 | Каваны чыгун | ||
| К4 | Каваны чыгун | ||
N | №1 | Алюмініева-крэмніевы сплаў, утрыманне крэмнію <9% | D2500 / D2600 / D5200 / D7200 / D9100 |
| Н2 | Крэмніева-алюмініевы сплаў, 9% | ||
| Н3 | Крэмній-алюмініевы сплаў, утрыманне крэмнію > 16% | ||
| №4 | Літы алюмініевы сплаў | ||
| №5 | Каваны алюмініевы сплаў | ||
| №10 | Медзь | ||
| №11 | Медны сплаў | ||
| Матэрыялы | Матэрыялы апрацоўваемых дэталяў | Brinell Цвёрдасць | Rockwell Цвёрдасць | Хуткасць рэзання Vc (m/min) | Feed Per Revolution fn (mm/rev) | ||||||||||||
| ІСО | HB | HRC | External Coolant | Internal Coolant | 3 | 4 | 6 | 8 | 10 | 12 | 14 | 16 | 18 | 20 | |||
P | П1 | Аўтарэзная сталь | <125 | 100 | 0.11 | 0.14 | 0.2 | 0.26 | 0.32 | 0.35 | 4 | 45 | 0.5 | 0.55 | |||
| П2 | Нізкавугляродзістая сталь (C<0.25%) | <125 | 100 | 0.11 | 0.14 | 0.2 | 0.26 | 0.32 | 0.35 | 0.4 | 0A5 | 0.5 | 0.55 | ||||
| П4 | Сярэдневугляродзістая сталь (0.25%), Нізкалегаваная сталь | <20 | <26 | 100 | 0.11 | 0.14 | 0.2 | 26 | 0.32 | 0.35 | 0.4 | 45 | 0.5 | 0.55 | |||
| П5 | Легаваная сталь, загартаваная і адпаленая сталь | 330 | 28-35 | 100 | 0.11 | 0.14 | 2 | 0.26 | 0.32 | 0.35 | 0.4 | 0.45 | 0.5 | 0.55 | |||
| H | H5 | Загартаваная і адпаленая сталь | 35-40 | 85 | 0.11 | 0.14 | 2 | 0.26 | 0.32 | 0.35 | 4 | 0A5 | 0.5 | 0.55 | |||
K | К1 | Шэры чыгун | 120-290 | <32 | 100 | 0.11 | 0.14 | 2 | 0.26 | 0.32 | 0.35 | 4 | 45 | 0.5 | 0.65 | ||
| К2 | Ушчыльненае графітавае жалеза (CGI) | 120-290 | <32 | 100 | 0.11 | 0.14 | 2 | 26 | 0.32 | 0.35 | 0.4 | 45 | 0.5 | 0.55 | |||
| К3 | Каваны чыгун | 130-260 | <28 | 100 | 0.11 | 0.14 | 0.2 | 0.26 | 0.32 | 0.35 | 4 | 0.45 | 0.5 | 0.55 | |||
| K⁴ | Каваны чыгун | 180-350 | <43 | 90 | 0.11 | 0.14 | 2 | 26 | 0.32 | 0.35 | 0.4 | 45 | 0.5 | 0.55 | |||
Straight-Flute Drill Application Cases
One-Pass Drilling in Hydraulic Valve Body Machining
Background
A hydraulic valve components supplier experienced excessive cycle times and short tool life in creating pre-drilled holes, and too many tool changes enhanced overall tooling costs.
Выклік
- Workpiece: Hydraulic Valve Body
- Material: AISI 304 Stainless Steel
- Hardness: 180–210 HB
- Hole Type: Blind Hole
- Hole Depth: Ø8.5 mm
- Requirement: Longer tool life with higher productivity and stable chip flow.
Рашэнне
- Tool Used: D7200-Series 5D Straight Shank Drill
- Coolant Type: Унутраная астуджальная сістэма
- Machine Tool: Vertical CNC Machining Center
- Spindle Speed: 3,900 rpm
- Feed Rate: 0.18 mm/rev (702 mm/min)
Results
Compared with the previously used drill, our straight-shank drills can achieve approximately 66% longer tool life and 88% reduced cycle time, decreasing the production costs and ensuring better chip control.

How JINOO Manufactures Straight-Flute Drills?
Precision CNC Grinding Machines
- WALTER Helitronic Power 400L
- WALTER Helitronic Vision 400L
- WALTER Helitronic Micro 400L
- Rollomatic NP5
- ANCA MX5
- ANCA MX7
These high-precision 5-axis grinding devices are engineered for machining straight-flute drills with their unique tool geometry, ensuring their tight tolerances within 0.003 mm and extended tool life.
- WALTER Helitronic Power 400L
- WALTER Helitronic Vision 400L
- WALTER Helitronic Micro 400L
- Rollomatic NP5
- ANCA MX5
- ANCA MX7
These high-precision 5-axis grinding devices are engineered for machining straight-flute drills with their unique tool geometry, ensuring their tight tolerances within 0.003 mm and extended tool life.
- WALTER Helitronic Power 400L
- WALTER Helitronic Vision 400L
- WALTER Helitronic Micro 400L
- Rollomatic NP5
- ANCA MX5
- ANCA MX7
These high-precision 5-axis grinding devices are engineered for machining straight-flute drills with their unique tool geometry, ensuring their tight tolerances within 0.003 mm and extended tool life.
- WALTER Helitronic Power 400L
- WALTER Helitronic Vision 400L
- WALTER Helitronic Micro 400L
- Rollomatic NP5
- ANCA MX5
- ANCA MX7
These high-precision 5-axis grinding devices are engineered for machining straight-flute drills with their unique tool geometry, ensuring their tight tolerances within 0.003 mm and extended tool life.
- WALTER Helitronic Power 400L
- WALTER Helitronic Vision 400L
- WALTER Helitronic Micro 400L
- Rollomatic NP5
- ANCA MX5
- ANCA MX7
These high-precision 5-axis grinding devices are engineered for machining straight-flute drills with their unique tool geometry, ensuring their tight tolerances within 0.003 mm and extended tool life.
- WALTER Helitronic Power 400L
- WALTER Helitronic Vision 400L
- WALTER Helitronic Micro 400L
- Rollomatic NP5
- ANCA MX5
- ANCA MX7
These high-precision 5-axis grinding devices are engineered for machining straight-flute drills with their unique tool geometry, ensuring their tight tolerances within 0.003 mm and extended tool life.
Advanced Quality Inspection System
1.ZOLLER G3 Tool Measurement: Utilized to verify the geometry and dimensional parameters of our straight-flute drills with measurement tolerances within ±2 μm.
2.PG1000 Optical Inspection: Used to perform microscopic analysis of edge preparation, coating conditions, and tool integrity to identify edge defects.
3.Parlec Tool Presetting: Used to ensure the correct tool length, minimal runout, and accurate clamping positioning.
We use the advanced quality inspection system to ensure our strict quality control, making straight-flute drills beyond the standard.
1.ZOLLER G3 Tool Measurement: Utilized to verify the geometry and dimensional parameters of our straight-flute drills with measurement tolerances within ±2 μm.
2.PG1000 Optical Inspection: Used to perform microscopic analysis of edge preparation, coating conditions, and tool integrity to identify edge defects.
3.Parlec Tool Presetting: Used to ensure the correct tool length, minimal runout, and accurate clamping positioning.
We use the advanced quality inspection system to ensure our strict quality control, making straight-flute drills beyond the standard.
1.ZOLLER G3 Tool Measurement: Utilized to verify the geometry and dimensional parameters of our straight-flute drills with measurement tolerances within ±2 μm.
2.PG1000 Optical Inspection: Used to perform microscopic analysis of edge preparation, coating conditions, and tool integrity to identify edge defects.
3.Parlec Tool Presetting: Used to ensure the correct tool length, minimal runout, and accurate clamping positioning.
We use the advanced quality inspection system to ensure our strict quality control, making straight-flute drills beyond the standard.
Fine-grain Carbide Tool Material
1.High-quality straight-flute drills of JINOO are manufactured from high-purity carbide tool materials, which are sourced from Guhring and GESAC.
2.Premium carbide tool material can deliver high durability and rigidity with high density, ensuring the heat and wear resistance of our straight-flute drills.
3.The cobalt content in our tungsten carbide substrates ranges from 10% to 12%.
4.The tool life of straight-flute drill bits can be extended by over 1.5 times.
Virgin Carbide Instead of Recycled Carbide
Virgin tungsten carbide we use in our straight-flute drills:
- Uniform grain size
- No impurities
- Longer lifespan
- Pure structure
- High wear resistance
Recycled carbide used in poor-quality drills:
- Uneven grain size
- Many impurities
- Друзлая структура
- Prone to tool breakage
- Short tool lifespan
Reliable Coating Partners
1.JINOO utilizes advanced coating technology from Oerlikon Balzers, which can help improve the cutting performance of straight-flute drills.
2.We can customize straight-flute drill bits for you with a combination of durable coatings.
3.High-performance coatings feature high tool rigidity and density.
4.Featuring durable coatings, our cutting tools can maximize their performance and tool service life under mass production.
High-performance Coating vs. Poor-quality Coating
High-quality coatings used in JINOO’s straight-flute drills:
- No peeling or flaking
- Consistent thickness
- Free of pores
- High oxidation resistance
- No edge adhesion
Poor-quality coatings used in inferior drill bits:
- Схільная да лушчэння
- Edge buildup
- Obvious pores
- Rapid tool wear
- Short tool life
ISO 9001 Quality Management System
- Сертыфікаваны ISO9001:2008
- Сертыфікаваны ISO9001:2015
- Кваліфікаваны вытворца SGS
- Кваліфікаваны вытворца TÜV Rheinland
- Правераны пастаўшчык Alibaba.com
- Правераны пастаўшчык, зроблены ў Кітаі
- 1688 platforms Verified Supplier
- Нацыянальнае высокатэхналагічнае прадпрыемства
- Changzhou High-Tech Product Certification
As a professional straight-flute drill bit manufacturer, we insist on high-quality manufacturing and continuous quality assurance training to suit global industrial requirements with authoritative approvals.
- Сертыфікаваны ISO9001:2008
- Сертыфікаваны ISO9001:2015
- Кваліфікаваны вытворца SGS
- Кваліфікаваны вытворца TÜV Rheinland
- Правераны пастаўшчык Alibaba.com
- Правераны пастаўшчык, зроблены ў Кітаі
- 1688 platforms Verified Supplier
- Нацыянальнае высокатэхналагічнае прадпрыемства
- Changzhou High-Tech Product Certification
As a professional straight-flute drill bit manufacturer, we insist on high-quality manufacturing and continuous quality assurance training to suit global industrial requirements with authoritative approvals.
- Сертыфікаваны ISO9001:2008
- Сертыфікаваны ISO9001:2015
- Кваліфікаваны вытворца SGS
- Кваліфікаваны вытворца TÜV Rheinland
- Правераны пастаўшчык Alibaba.com
- Правераны пастаўшчык, зроблены ў Кітаі
- 1688 platforms Verified Supplier
- Нацыянальнае высокатэхналагічнае прадпрыемства
- Changzhou High-Tech Product Certification
As a professional straight-flute drill bit manufacturer, we insist on high-quality manufacturing and continuous quality assurance training to suit global industrial requirements with authoritative approvals.
- Сертыфікаваны ISO9001:2008
- Сертыфікаваны ISO9001:2015
- Кваліфікаваны вытворца SGS
- Кваліфікаваны вытворца TÜV Rheinland
- Правераны пастаўшчык Alibaba.com
- Правераны пастаўшчык, зроблены ў Кітаі
- 1688 platforms Verified Supplier
- Нацыянальнае высокатэхналагічнае прадпрыемства
- Changzhou High-Tech Product Certification
As a professional straight-flute drill bit manufacturer, we insist on high-quality manufacturing and continuous quality assurance training to suit global industrial requirements with authoritative approvals.
- Сертыфікаваны ISO9001:2008
- Сертыфікаваны ISO9001:2015
- Кваліфікаваны вытворца SGS
- Кваліфікаваны вытворца TÜV Rheinland
- Правераны пастаўшчык Alibaba.com
- Правераны пастаўшчык, зроблены ў Кітаі
- 1688 platforms Verified Supplier
- Нацыянальнае высокатэхналагічнае прадпрыемства
- Changzhou High-Tech Product Certification
As a professional straight-flute drill bit manufacturer, we insist on high-quality manufacturing and continuous quality assurance training to suit global industrial requirements with authoritative approvals.
- Сертыфікаваны ISO9001:2008
- Сертыфікаваны ISO9001:2015
- Кваліфікаваны вытворца SGS
- Кваліфікаваны вытворца TÜV Rheinland
- Правераны пастаўшчык Alibaba.com
- Правераны пастаўшчык, зроблены ў Кітаі
- 1688 platforms Verified Supplier
- Нацыянальнае высокатэхналагічнае прадпрыемства
- Changzhou High-Tech Product Certification
As a professional straight-flute drill bit manufacturer, we insist on high-quality manufacturing and continuous quality assurance training to suit global industrial requirements with authoritative approvals.
- Сертыфікаваны ISO9001:2008
- Сертыфікаваны ISO9001:2015
- Кваліфікаваны вытворца SGS
- Кваліфікаваны вытворца TÜV Rheinland
- Правераны пастаўшчык Alibaba.com
- Правераны пастаўшчык, зроблены ў Кітаі
- 1688 platforms Verified Supplier
- Нацыянальнае высокатэхналагічнае прадпрыемства
- Changzhou High-Tech Product Certification
As a professional straight-flute drill bit manufacturer, we insist on high-quality manufacturing and continuous quality assurance training to suit global industrial requirements with authoritative approvals.
- Сертыфікаваны ISO9001:2008
- Сертыфікаваны ISO9001:2015
- Кваліфікаваны вытворца SGS
- Кваліфікаваны вытворца TÜV Rheinland
- Правераны пастаўшчык Alibaba.com
- Правераны пастаўшчык, зроблены ў Кітаі
- 1688 platforms Verified Supplier
- Нацыянальнае высокатэхналагічнае прадпрыемства
- Changzhou High-Tech Product Certification
As a professional straight-flute drill bit manufacturer, we insist on high-quality manufacturing and continuous quality assurance training to suit global industrial requirements with authoritative approvals.
- Сертыфікаваны ISO9001:2008
- Сертыфікаваны ISO9001:2015
- Кваліфікаваны вытворца SGS
- Кваліфікаваны вытворца TÜV Rheinland
- Правераны пастаўшчык Alibaba.com
- Правераны пастаўшчык, зроблены ў Кітаі
- 1688 platforms Verified Supplier
- Нацыянальнае высокатэхналагічнае прадпрыемства
- Changzhou High-Tech Product Certification
As a professional straight-flute drill bit manufacturer, we insist on high-quality manufacturing and continuous quality assurance training to suit global industrial requirements with authoritative approvals.
Technical Support & Tool Optimization
1.We can customize tools for you according to a wide range of tool sizes.
2.JINOO can offer you regrinding services to improve the straight-flute drill bit life. You can save over 38% tooling costs after regrinding for 3 times, and achieve excellent consistency of grinding tools.
3.JINOO’ s experienced engineering team can provide you with comprehensive technical support.
водгукі
FAQ about Straight-Flute Drills
What is the lead time of straight-flute drills for production?
Our production times for the straight-flute drills will normally be between 7 and 15 days because of the premium carbide bar stocks, which need to be shipped from Germany. As for the lead time, we work with world-famous postal companies such as DHL, FedEx and UPS to secure the time of delivery.
Do you provide customized services of straight-flute drills?
Of course! We furnish non-standard customization beyond standard sizes according to your personalized needs. Factors such as materials, diameter, flute length, and coating selection of JINOO’s straight-flute drills can all be modified to meet your exacting requirements. We will provide you with cutting-edge solutions to ensure an exceptional user experience.
What is your MOQ (Minimum Order Quantity) of straight-flute drills?
For our standard size of solid carbide straight-flute drills, we have a minimum order quantity of 5 pieces. Beyond that, if you want JINOO to customize tools for you, there’s generally no minimum order quantity for non-standard tools, and even a small order can be accepted.
What payment methods do you accept for solid carbide straight-flute drills?
The payment method of our straight-flute drills can be flexible. We usually accept bank transfer, credit card, and PayPal. If you have other requirements about the payment method, we can modify the payment method based on your order.
Twist drill bits are designed with helical flutes for chip evacuation, and they are common for machining metal, steel parts, and wood. Straight-flute drill bits feature parallel flutes, which have no helix angles. Hence, they have higher rigidity and hole accuracy, while less efficient chip evacuation.
In modern CNC machining, twist drill bits are more suitable for drilling deep holes and machining long-chip materials. However, straight-flute drills are more typical for machining shallow holes and cast iron with demanding requirements of cutting stability and hole roundness.
External coolant design of straight shank drills can deliver coolants to cutting edges to directly decrease heat generation and tool friction, which is suitable for drilling deep holes and machining harder materials with longer tool life.
Straight-flute drill bits can deliver superior tool rigidity and improved chip control. They demonstrate higher cutting stability in CNC machining with hole accuracy, especially in drilling harder materials.
Straight-flute drills are perfect for CNC machining of cast iron as they feature improved tool rigidity, further decreasing the tool vibration and improving the hole accuracy. Compared with standard twist drills, their optimized straight flute design can promote their hole straightness.
Звяжыцеся з нашым аддзелам продажаў або ўвайдзіце ў сістэму, каб даведацца пра ўсе варыянты цэнаўтварэння.
ПРА НАС
JINOO Tools Group is a “National High-Tech Enterprise”, which was founded in 2006 and specializes in manufacturing high-precision solid carbide cutting tools with over 25,000㎡ manufacturing bases. Our cutting tools are widely used in the automotive, aerospace, and equipment manufacturing industries. We have accumulated over 50 national patents and passed the ISO:9001 certification, devoted to creating high-quality straight-flute drills for you.
Каталог прадукцыі
Сцэнарыі прымянення

Звязаныя тавары

Coating: HELICA
Глыбіня рэзання: 3×D
Глыбіня рэзання: 5×D
Знешняя астуджальная сістэма
Унутраная астуджальная сістэма
Бок машыны: DIN 6535 HA
Талерантнасць: M7
Кут нахілу: 140°
Стандарт: DIN 6535-HA

Coating: HELICA
Глыбіня рэзання: 3×D
Глыбіня рэзання: 5×D
Знешняя астуджальная сістэма
Унутраная астуджальная сістэма
Бок машыны: DIN 6535 HA
Талерантнасць: M7
Кут нахілу: 140°
Стандарт: DIN 6535-HA

Пакрыццё: пакрыццё AITiN-nano
Глыбіня рэзання: 3×D
Глыбіня рэзання: 5×D
Cutting Depth: 8×D
Cutting Depth: 12×D
Знешняя астуджальная сістэма
Унутраная астуджальная сістэма
Бок машыны: DIN 6535 HA
Талерантнасць: M7
Кут нахілу: 140°
Стандарт: DIN 6535-HA

Coating: HELICA
Cutting Depth: 3×D
Знешняя астуджальная сістэма
Унутраная астуджальная сістэма
Бок машыны: DIN 6535 HA
Талерантнасць: M7
Кут нахілу: 140°
Стандарт: DIN 6535-HA

Глыбіня рэзання: 5×D
Знешняя астуджальная сістэма
Унутраная астуджальная сістэма
Бок машыны: DIN 6535 HA
Талерантнасць: M7
Кут нахілу: 140°
Стандарт: DIN 6535-HA

Пакрыццё: TiAISiN
Глыбіня рэзання: 3×D
Глыбіня рэзання: 5×D
Унутраная астуджальная сістэма
Бок машыны: DIN 6535 HA
Талерантнасць: M7
Кут нахілу: 140°
Стандарт: DIN 6535-HA

Пакрыццё: пакрыццё AITiN-nano
Глыбіня рэзання: 15×D
Глыбіня рэзання: 20×D
Глыбіня рэзання: 25×D
Глыбіня рэзання: 30×D
Глыбіня рэзання: 40×D
Унутраная астуджальная сістэма
Бок машыны: DIN 6535 HA
Талерантнасць: H7
Кут нахілу: 135°
Стандарт: DIN 6535-HA

Coating: AITiN
Глыбіня рэзання: 3×D
Знешняя астуджальная сістэма
Бок машыны: DIN 6535 HA
Талерантнасць: M7
Point Angle: 150°
Стандарт: DIN 6535-HA




























































