NC Center Drill Design Highlights
- Κατασκευή από συμπαγές καρβίδιο
- Oerlikon AITiN Coating Technology
- 90° and 120° Point Angle Design
- Cutting Edge Preparation
- Βελτιστοποιημένη Γεωμετρία Φλάουτου
- Reinforced Core Design
Center Drill Types

60° 2-Flute Center Drills for Steel (Nano-Bronze)
Suitable for high-precision spotting and centering with Nano-Bronze coatings.

Π: Χάλυβας
Μ: Ανοξείδωτο ατσάλι
Κ: Χυτοσίδηρος
N: Μη σιδηρούχα
S: Superalloy
BZ: Bronze
2 φλάουτα
Σχεδιασμός εξωτερικού ψυκτικού
DIN 6535-HA
Ευθύ στέλεχος
Γεώτρηση
Κοπή με το δεξί χέρι
60° Point Angle
Κατασκευή από συμπαγές καρβίδιο

60° 2-Flute Center Drills for Steel (Nano-Blue)
Designed for accurate centering in steel parts, featuring the Nano-Blue coatings for heat and wear resistance.

Π: Χάλυβας
Μ: Ανοξείδωτο ατσάλι
Κ: Χυτοσίδηρος
N: Μη σιδηρούχα
S: Superalloy
BE: Blue
2 φλάουτα
Γεώτρηση
Σχεδιασμός εξωτερικού ψυκτικού
DIN 6535-HA
Ευθύ στέλεχος
Κοπή με το δεξί χέρι
60° Point Angle
Κατασκευή από συμπαγές καρβίδιο
Μ7

60° 2-Flute Center Drills for Aluminum (Uncoated)
Specialized for centering in aluminum to deliver superior surface finishes without burr formation.

Π: Χάλυβας
Μ: Ανοξείδωτο ατσάλι
Κ: Χυτοσίδηρος
N: Μη σιδηρούχα
S: Superalloy
2 φλάουτα
Γεώτρηση
Σχεδιασμός εξωτερικού ψυκτικού
DIN 6535-HA
Ευθύ στέλεχος
Κοπή με το δεξί χέρι
60° Point Angle
Κατασκευή από συμπαγές καρβίδιο
Μ7

60° 2-Flute Center Drills for Aluminum (DLC)
Optimized for smooth aluminum machining with high-performance DLC coatings to decrease chip adhesion.

Π: Χάλυβας
Μ: Ανοξείδωτο ατσάλι
Κ: Χυτοσίδηρος
N: Μη σιδηρούχα
S: Superalloy
Oerlikon DLC Coating
2 φλάουτα
Γεώτρηση
Σχεδιασμός εξωτερικού ψυκτικού
DIN 6535-HA
Ευθύ στέλεχος
Κοπή με το δεξί χέρι
60° Point Angle
Κατασκευή από συμπαγές καρβίδιο
Μ7

90° 2-Flute Center Drills for Steel (Nano-Bronze)
Designed for accurate 90° spotting and chamfering with Nano-Bronze coatings, decreasing the tool wear.

Π: Χάλυβας
Μ: Ανοξείδωτο ατσάλι
Κ: Χυτοσίδηρος
N: Μη σιδηρούχα
S: Superalloy
BZ: Bronze
2 φλάουτα
Γεώτρηση
Σχεδιασμός εξωτερικού ψυκτικού
DIN 6535-HA
Ευθύ στέλεχος
Κοπή με το δεξί χέρι
90° Point Angle
Κατασκευή από συμπαγές καρβίδιο
Μ7

90° 2-Flute Center Drills for Steel (Nano-Blue)
Suitable for 90° center drilling in steel with Nano-Blue coatings, delivering high thermal stability.

Π: Χάλυβας
Μ: Ανοξείδωτο ατσάλι
Κ: Χυτοσίδηρος
N: Μη σιδηρούχα
S: Superalloy
BE: Blue
2 φλάουτα
Γεώτρηση
Σχεδιασμός εξωτερικού ψυκτικού
DIN 6535-HA
Ευθύ στέλεχος
Κοπή με το δεξί χέρι
90° Point Angle
Κατασκευή από συμπαγές καρβίδιο
Μ7

90° 2-Flute Center Drills for Steel (Nano-Black)
Suitable for heavy-duty steel machining with Nano-Black coatings, featuring unmatched hardness and durability.

Π: Χάλυβας
Μ: Ανοξείδωτο ατσάλι
Κ: Χυτοσίδηρος
N: Μη σιδηρούχα
S: Superalloy
BK: Black
2 φλάουτα
Γεώτρηση
Σχεδιασμός εξωτερικού ψυκτικού
DIN 6535-HA
Ευθύ στέλεχος
Κοπή με το δεξί χέρι
90° Point Angle
Κατασκευή από συμπαγές καρβίδιο
Μ7

90° 2-Flute Center Drills for Aluminum (Uncoated)
Optimized for precision 90° spotting with edge sharpness and clean surfaces.

Π: Χάλυβας
Μ: Ανοξείδωτο ατσάλι
Κ: Χυτοσίδηρος
N: Μη σιδηρούχα
S: Superalloy
2 φλάουτα
Γεώτρηση
Σχεδιασμός εξωτερικού ψυκτικού
DIN 6535-HA
Ευθύ στέλεχος
Κοπή με το δεξί χέρι
90° Point Angle
Κατασκευή από συμπαγές καρβίδιο
Μ7

90° 2-Flute Center Drills for Aluminum (DLC)
Minimal built-up edge can be achieved with smooth chip evacuation and surface finishes in aluminum machining.

Π: Χάλυβας
Μ: Ανοξείδωτο ατσάλι
Κ: Χυτοσίδηρος
N: Μη σιδηρούχα
S: Superalloy
Oerlikon DLC coating
2 φλάουτα
Γεώτρηση
Σχεδιασμός εξωτερικού ψυκτικού
DIN 6535-HA
Ευθύ στέλεχος
Κοπή με το δεξί χέρι
90° Point Angle
Κατασκευή από συμπαγές καρβίδιο
Μ7

120° 2-Flute Center Drills for Steel (Nano-Bronze)
Provides accurate 120° centering in steel parts, designed with Nano-Bronze coatings for heat and wear resistance.

Π: Χάλυβας
Μ: Ανοξείδωτο ατσάλι
Κ: Χυτοσίδηρος
N: Μη σιδηρούχα
S: Superalloy
BZ: Bronze
2 φλάουτα
Σχεδιασμός εξωτερικού ψυκτικού
DIN 6535-HA
Ευθύ στέλεχος
Γεώτρηση
Κοπή με το δεξί χέρι
Γωνία σημείου 120°
Κατασκευή από συμπαγές καρβίδιο
Μ7

120° 2-Flute Center Drills for Steel (Nano-Blue)
Engineered for 120° spotting in steel with Nano-Blue coatings, promoting the cutting consistency.

Π: Χάλυβας
Μ: Ανοξείδωτο ατσάλι
Κ: Χυτοσίδηρος
N: Μη σιδηρούχα
S: Superalloy
BE: Blue
2 φλάουτα
Γεώτρηση
Σχεδιασμός εξωτερικού ψυκτικού
DIN 6535-HA
Ευθύ στέλεχος
Κοπή με το δεξί χέρι
Γωνία σημείου 120°
Κατασκευή από συμπαγές καρβίδιο
Μ7

120° 2-Flute Center Drills for Aluminum (Uncoated)
Engineered for accurate 120° center drilling in aluminum with clean cuts and superior chip flow.

Π: Χάλυβας
Μ: Ανοξείδωτο ατσάλι
Κ: Χυτοσίδηρος
N: Μη σιδηρούχα
S: Superalloy
2 φλάουτα
Γεώτρηση
Σχεδιασμός εξωτερικού ψυκτικού
DIN 6535-HA
Ευθύ στέλεχος
Κοπή με το δεξί χέρι
Γωνία σημείου 120°
Κατασκευή από συμπαγές καρβίδιο
Μ7

120° 2-Flute Center Drills for Aluminum (DLC)
Optimized for aluminum center drilling with high-performance DLC coatings, enabling their minimal tool friction and chip adhesion.

Π: Χάλυβας
Μ: Ανοξείδωτο ατσάλι
Κ: Χυτοσίδηρος
N: Μη σιδηρούχα
S: Superalloy
Oerlikon DLC coating
2 φλάουτα
Γεώτρηση
Σχεδιασμός εξωτερικού ψυκτικού
DIN 6535-HA
Ευθύ στέλεχος
Κοπή με το δεξί χέρι
Γωνία σημείου 120°
Κατασκευή από συμπαγές καρβίδιο
Μ7
Why Choose Our NC Center Drills?
JINOO’s D9100-Series solid carbide center drills feature a unique geometry design, promoting the creation of more accurate holes with higher machining efficiency.

Fine-Grain Carbide Substrate
Our center drills are all manufactured from ultra-fine grain carbide substrates with uniform structure and uniform grain distribution.

Oerlikon AlTiN Coating Technology
Oerlikon AlTiN coatings feature even coating thickness and strong adhesion to improve drill bit performance.

90° and 120° Point Angle Design
90° and 120° point angles are available in center drill types to suit centering and positioning needs.

Cutting Edge Preparation
Micro-honed cutting edges of center drills are designed with a controllable edge radius and improved edge integrity.

Βελτιστοποιημένη Γεωμετρία Φλάουτου
Center drills are engineered with optimized flutes, which feature superior profiles and precisely-ground surfaces.

Reinforced Core Design
The reinforced core geometry is designed with a higher core thickness and a rigid structure.
Center Drill Geometry Breakdown
1.Fine-Grain Carbide Substrate for Higher Rigidity
Our solid carbide center drill bits are manufactured from 0.2μm fine-grain carbide, enabling higher tool rigidity and wear resistance in precision spotting.
2.AlTiN Coatings for High Heat Resistance
Combined with advanced Oerlikon AITiN coatings, center drills can enhance heat resistance up to 900°C, especially when they are used for spotting in stainless steel.
3. 90° and 120° Point Angles for Positional Accuracy
Specialized 90° and 120° drill point angles can deliver stable tool engagement and precise hole positioning with the accurate pilot seat.
4. Precise Edge Preparation for Edge Integrity
Micro-honed cutting edges can uniformly distribute cutting loads and minimize edge chipping with the controlled edge radius.
5. Optimized Flute Geometry for Efficient Chip Flow
Precision-ground flutes can promote efficient chip evacuation and greatly decrease heat generation.
6. Reinforced Core Design for Higher Strength
Increased web thickness greatly improves torsional rigidity with bending resistance to minimize tool vibration.
7. Balanced Helix Angles for Superior Chip Control
Balanced helix angles are typically between 20° and 30° to balance edge strength and sharpness, improving the control of chip flow.
8. Shortened Chisel Edge for Less Thrust Force
The short chisel edge design can decrease the extrusion zone to reduce thrust force, enhancing centering accuracy with smooth entry.
9. Precisely-Ground Relief Angle for Less Friction
Precision-ground relief angle can minimize flank contact with sufficient edge support, decreasing the tool friction and improving dimensional accuracy.

Τεχνικά δεδομένα
| Υπόστρωμα εξαιρετικά λεπτού κόκκου | 0.2μm / 0.4μm / 0.6μm |
| Ανοχή | Η6 |
| Επένδυση | AlTiN + TiSiN / TiAlSiN-X / AlTiN / TiAlN / TiAlSiN / DLC / AlCrN / AlCrSiN / AlTiSiN / TiSiXN / Διαθέσιμο κατά παραγγελία |
| Αριθμός φλάουτου | 2 |
| Συνολικό μήκος | 50 / 60 / 75 / 100 / 150 / 200mm / Προσαρμοσμένο μήκος |
| Διάμετρος στελέχους | 4/6/8/10/12/14/16/18/20mm / Προσαρμοσμένη διάμετρος |

Center Drill Specifications
Custom Center Drill Size Size Range
Υπόστρωμα καρβιδίου
Οδηγός γρήγορης επιλογής
Συνιστώμενες παράμετροι κοπής
| Κώδικας | Διάμετρος (mm) | Διάμετρος (σε) | Διάμετρος στελέχους (σε ίντσες) | Συνολικό μήκος OAL (ίντσες) | Μήκος φλάουτου (σε) | Μήκος στελέχους (σε) | |
| Code (90°) | Code (120°) | ||||||
| D9100-090-D03175 | D9100-120-D03175 | 3.175 | 0.125 | 6 | 62 | 20 | 14 |
| D9100-090-D03571 | D9100-120-D03571 | 3.571 | 0.1406 | 6 | 62 | 20 | 14 |
| D9100-090-D03970 | D9100-120-D03970 | 3.97 | 0.1563 | 6 | 66 | 24 | 17 |
| D9100-090-D04366 | D9100-120-D04366 | 4.366 | 0.1719 | 6 | 66 | 24 | 17 |
| D9100-090-D04763 | D9100-120-D04763 | 4.763 | 0.1875 | 6 | 66 | 28 | 20 |
| D9100-090-D05159 | D9100-120-D05159 | 5.159 | 0.2031 | 6 | 66 | 28 | 20 |
| D9100-090-D05558 | D9100-120-D05558 | 5.558 | 0.2188 | 6 | 66 | 28 | 20 |
| D9100-090-D05949 | D9100-120-D05949 | 5.949 | 0.2344 | 6 | 66 | 28 | 20 |
| D9100-090-D06350 | D9100-120-D06350 | 6.35 | 0.25 | 8 | 79 | 34 | 24 |
| D9100-090-D06746 | D9100-120-D06746 | 6.746 | 0.2656 | 8 | 79 | 34 | 24 |
| D9100-090-D07145 | D9100-120-D07145 | 7.145 | 0.2813 | 8 | 79 | 41 | 29 |
| D9100-090-D07541 | D9100-120-D07541 | 7.541 | 0.2969 | 8 | 79 | 41 | 29 |
| D9100-090-D07938 | D9100-120-D07938 | 7.938 | 0.3125 | 8 | 79 | 41 | 29 |
| D9100-090-D08344 | D9100-120-D08344 | 8.334 | 0.3281 | 10 | 89 | 47 | 35 |
| D9100-090-D08733 | D9100-120-D08733 | 8.733 | 0.3438 | 10 | 89 | 47 | 35 |
| D9100-090-D09129 | D9100-120-D09129 | 9.129 | 0.3594 | 10 | 89 | 47 | 35 |
| D9100-090-D09525 | D9100-120-D09525 | 9.525 | 0.375 | 10 | 89 | 47 | 35 |
| D9100-090-D09921 | D9100-120-D09921 | 9.921 | 0.3906 | 10 | 89 | 47 | 35 |
| D9100-090-D10320 | D9100-120-D10320 | 10.32 | 0.4063 | 12 | 102 | 55 | 40 |
| D9100-090-D10716 | D9100-120-D10716 | 10.716 | 0.4219 | 12 | 102 | 55 | 40 |
| D9100-090-D11111 | D9100-120-D11111 | 11.111 | 0.4375 | 12 | 102 | 55 | 40 |
| D9100-090-D11509 | D9100-120-D11509 | 11.509 | 0.4531 | 12 | 102 | 55 | 40 |
| D9100-090-D11908 | D9100-120-D11908 | 11.908 | 0.4688 | 12 | 102 | 55 | 40 |
| D9100-090-D12300 | D9100-120-D12300 | 12.3 | 0.4843 | 14 | 107 | 60 | 43 |
| D9100-090-D12700 | D9100-120-D12700 | 12.7 | 0.5 | 14 | 107 | 60 | 43 |
| D9100-090-D13100 | D9100-120-D13100 | 13.1 | 0.5157 | 14 | 107 | 60 | 43 |
| D9100-090-D13891 | D9100-120-D13891 | 13.891 | 0.5469 | 14 | 107 | 60 | 43 |
| D9100-090-D14288 | D9100-120-D14288 | 14.288 | 0.5625 | 16 | 115 | 65 | 45 |
| D9100-090-D14684 | D9100-120-D14684 | 14.684 | 0.5781 | 16 | 115 | 65 | 45 |
| D9100-090-D15083 | D9100-120-D15083 | 15.083 | 0.5938 | 16 | 115 | 65 | 45 |
| D9100-090-D15479 | D9100-120-D15479 | 15.479 | 0.6094 | 16 | 115 | 65 | 45 |
| D9100-090-D15875 | D9100-120-D15875 | 15.875 | 0.625 | 16 | 115 | 65 | 45 |
| D9100-090-D17463 | D9100-120-D17463 | 17.463 | 0.6875 | 18 | 123 | 73 | 51 |
| D9100-090-D19050 | D9100-120-D19050 | 19.05 | 0.75 | 20 | 131 | 79 | 55 |
| Μέγεθος κόκκων | Χαρακτηριστικό | Κατάλληλα υλικά | Πλεονέκτημα |
| 0,2μ | Εξαιρετικά λεπτόκοκκος κόκκος, εξαιρετικά υψηλή σκληρότητα, πολύ κοφτερή κόψη | Σκληρυμένος χάλυβας (HRC60+), ανοξείδωτος χάλυβας, κράματα τιτανίου, εργαλεία μικροδιαμέτρου | Εξαιρετική αντοχή στη φθορά και ευκρίνεια στις άκρες, ιδανική για φινίρισμα υψηλής ακρίβειας, αλλά χαμηλότερη ανθεκτικότητα |
| 0,4μ | Υπερλεπτοί κόκκοι, εξαιρετική ισορροπία σκληρότητας-ανθεκτικότητας | ισορροπία σκληρότητας-ανθεκτικότητας Σκληρυμένος χάλυβας, ανοξείδωτος χάλυβας, κράμα χάλυβα, χάλυβας ακριβείας | Υψηλή αντοχή στη φθορά με καλή σταθερότητα στις άκρες, κατάλληλη για φινίρισμα και ημι-φινίρισμα |
| 0,6μ | Λεπτός κόκκος, ισορροπημένη απόδοση | Χάλυβας άνθρακα, κράμα χάλυβα, ανοξείδωτος χάλυβας, χυτοσίδηρος (γενικοί όροι) | Καλή ισορροπία αντοχής στη φθορά και σκληρότητας, ευέλικτο, γενικής χρήσης |
| 0,7μ | Μεσαίου-λεπτού κόκκου, βελτιωμένη σκληρότητα | Γενικός χάλυβας, χάλυβας χαμηλού κράματος, συνθήκες διακοπτόμενης κοπής | Καλύτερη αντοχή στο ξεφλούδισμα, κατάλληλη για ημι-ξεροψιχα και ασταθή κοπή |
| 0,8μ | Μεσαίου μεγέθους κόκκοι, υψηλή σκληρότητα | Χάλυβας χαμηλής περιεκτικότητας σε άνθρακα, τραχιά κατεργασία, βαριά διακοπτόμενη κοπή | Ισχυρή αντοχή σε κρούσεις, κατάλληλη για τραχύ κόψιμο και απαιτητική σταθερότητα κοπής |
| Υλικά | Υλικά τεμαχίου εργασίας | Τύπος | |
| ISO | |||
P | P1 | Χάλυβας ελεύθερης κοπής | D2100 / D2200 / D2300 / D2400 / D2600 / D3000 / D5200 / D9100 |
| P2 | Χάλυβας χαμηλής περιεκτικότητας σε άνθρακα (C <0,25%) | ||
| P4 | Μέσος χάλυβας άνθρακα (0.25%), Χαμηλό κράμα χάλυβα | ||
| P5 | Κράμα χάλυβα, σβησμένος και σκληρυμένος χάλυβας | ||
| P6 | Χάλυβας υψηλής περιεκτικότητας σε άνθρακα (C> 0,6%) | ||
| P11 | Φερριτικό ανοξείδωτο, μαρτενσιτικό ανοξείδωτο χάλυβα | ||
H | H5 | Σκληρυμένο και σκληρυμένο χάλυβα | D2100 / D2200 / D2300 / D2400 / D2600 / D3000 |
| Η7 | Χάλυβας ρουλεμάν | ||
| Η8 | Χάλυβας εργαλείων, χάλυβας υψηλής ταχύτητας | ||
| H12 | Σκληρυμένο ανοξείδωτο ατσάλι | ||
| H21 | Επιψευδαργυρωμένος χάλυβας | ||
M | Μ1 | Ωστενιτικό ανοξείδωτο χάλυβα | D2100 / D2200 / D2400 / D2600 / D3000 / D5200 / D9100 |
| Μ2 | Υψηλής αντοχής ωστενιτικό ανοξείδωτο χάλυβα | ||
| Μ4 | Διπλής όψης από ανοξείδωτο χάλυβα | ||
S | S1 | Υπερκράμα με βάση το σίδηρο | D2600 / D9100 |
| S2 | Υπερκράμα με βάση το κοβάλτιο | ||
| S3 | Υπερκράμα με βάση το νικέλιο | ||
| S11 | Κράμα τιτανίου (χαμηλού κράματος) | ||
| S13 | Κράμα τιτανίου (υψηλό κράμα) | ||
K | Κ1 | Γκρι χυτοσίδηρος | D2100 / D2200 / D2300 / D2400 / D3000 / D5200 / D7200 / D9100 |
| Κ2 | Συμπυκνωμένος γραφιτικός σίδηρος (CGI) | ||
| Κ3 | Ελατό χυτοσίδηρο | ||
| Κ4 | Όλκιμος χυτοσίδηρος | ||
N | Ν1 | Κράμα αλουμινίου-πυριτίου, περιεκτικότητα σε πυρίτιο <9% | D2500 / D2600 / D5200 / D7200 / D9100 |
| Ν2 | Κράμα πυριτίου-αλουμινίου, 9% | ||
| Ν3 | Κράμα πυριτίου-αλουμινίου, περιεκτικότητα σε πυρίτιο>16% | ||
| Ν4 | Χυτό κράμα αλουμινίου | ||
| Ν5 | Σφυρήλατο κράμα αλουμινίου | ||
| Ν10 | Χαλκός | ||
| Ν11 | Κράμα χαλκού | ||
| Υλικά | Υλικά τεμαχίου εργασίας | Μπρίνελ Σκληρότητα | Ρόκγουελ Σκληρότητα | Ταχύτητα κοπής Vc (m/λεπτό) | Τροφοδοσία ανά περιστροφή fn (mm/rev) | |||||||||||
| ISO | ΗΒ | HRC | Εξωτερικός Ψυκτικό | Εσωτερικός Ψυκτικό | 3 | 4 | 6 | 8 | 10 | 12 | 14 | 16 | 18 | 20 | ||
P | P1 | Χάλυβας ελεύθερης κοπής | <125 | 100 | 0.12 | 0.15 | 0.18 | 0.2 | 0.22 | 0.24 | 0.26 | 0.3 | 0.33 | 0.35 | ||
| P2 | Χάλυβας χαμηλής περιεκτικότητας σε άνθρακα (C <0,25%) | <125 | 100 | 0.12 | 0.15 | 0.18 | 0.2 | 0.22 | 0.24 | 0.26 | 0.3 | 0.33 | 0.35 | |||
| P4 | Μέσος χάλυβας άνθρακα (0.25%), Χαμηλό κράμα χάλυβα | <220 | <25 | 100 | 0.12 | 0.15 | 0.18 | 0.2 | 0.22 | 0.24 | 0.26 | 0.3 | 0.33 | 0.35 | ||
| P5 | Κράμα χάλυβα, σβησμένος και σκληρυμένος χάλυβας | <330 | 28-35 | 100 | 0.12 | 0.15 | 0.18 | 0.2 | 0.22 | 0.24 | 0.26 | 0.3 | 0.33 | 0.35 | ||
| P6 | Χάλυβας υψηλής περιεκτικότητας σε άνθρακα (C> 0,6%) | 370-750 | 45-65 | 70 | 0.12 | 0.15 | 0.18 | 0.2 | 0.22 | 0.24 | 0.26 | 0.3 | 0.33 | 0.35 | ||
| P11 | Φερριτικό ανοξείδωτο, μαρτενσιτικό ανοξείδωτο χάλυβα | 250-450 | 38-50 | 80 | 0.12 | 0.15 | 0.18 | 0.2 | 0.22 | 0.24 | 0.26 | 0.3 | 0.33 | 0.35 | ||
H | H5 | Σκληρυμένο και σκληρυμένο χάλυβα | 35-40 | 70 | 0.12 | 0.15 | 0.18 | 0.2 | 0.22 | 0.24 | 0.26 | 0.3 | 0.33 | 0.35 | ||
| Η7 | Χάλυβας ρουλεμάν | 56-64 | 60 | 0.12 | 0.15 | 0.18 | 0.2 | 0.22 | 0.24 | 0.26 | 0.3 | 0.33 | 0.35 | |||
| Η8 | Χάλυβας εργαλείων, χάλυβας υψηλής ταχύτητας | 38-64 | 50 | 0.12 | 0.15 | 0.18 | 0.2 | 0.22 | 0.24 | 0.26 | 0.3 | 0.33 | 0.35 | |||
| H12 | Σκληρυμένο ανοξείδωτο ατσάλι | 33-50 | 60 | 0.12 | 0.15 | 0.18 | 0.2 | 0.22 | 0.24 | 0.26 | 0.3 | 0.33 | 0.35 | |||
| H21 | Επιψευδαργυρωμένος χάλυβας | 35-64 | 50 | 0.12 | 0.15 | 0.18 | 0.2 | 0.22 | 0.24 | 0.26 | 0.3 | 0.33 | 0.35 | |||
M | Μ1 | Ωστενιτικό ανοξείδωτο χάλυβα | <150 | 50 | 0.12 | 0.15 | 0.18 | 0.2 | 0.22 | 0.24 | 0.26 | 0.3 | 0.33 | 0.35 | ||
| Μ2 | Υψηλής αντοχής ωστενιτικό ανοξείδωτο χάλυβα | 150-230 | 45 | 0.12 | 0.15 | 0.18 | 0.2 | 0.22 | 0.24 | 0.26 | 0.3 | 0.33 | 0.35 | |||
| Μ4 | Διπλής όψης από ανοξείδωτο χάλυβα | 135-275 | 30 | 0.12 | 0.15 | 0.18 | 0.2 | 0.22 | 0.24 | 0.26 | 0.3 | 0.33 | 0.35 | |||
S | S1 | Υπερκράμα με βάση το σίδηρο | 160-260 | 25-48 | 30 | 0.12 | 0.15 | 0.18 | 0.2 | 0.22 | 0.24 | 0.26 | 0.3 | 0.33 | 0.35 | |
| S2 | Υπερκράμα με βάση το κοβάλτιο | 250-450 | 25-48 | 30 | 0.12 | 0.15 | 0.18 | 0.2 | 0.22 | 0.24 | 0.26 | 0.3 | 0.33 | 0.35 | ||
| S3 | Υπερκράμα με βάση το νικέλιο | 160-450 | <48 | 30 | 0.12 | 0.15 | 0.18 | 0.2 | 0.22 | 0.24 | 0.26 | 0.3 | 0.33 | 0.35 | ||
| S11 | Κράμα τιτανίου (χαμηλού κράματος) | 250-350 | 33-38 | 30 | 0.12 | 0.15 | 0.18 | 0.2 | 0.22 | 0.24 | 0.26 | 0.3 | 0.33 | 0.35 | ||
| S13 | Κράμα τιτανίου (υψηλό κράμα) | 300-400 | 36-48 | 30 | 0.12 | 0.15 | 0.18 | 0.2 | 0.22 | 0.24 | 0.26 | 0.3 | 0.33 | 0.35 | ||
K | Κ1 | Γκρι χυτοσίδηρος | 120-290 | <32 | 100 | 0.12 | 0.15 | 0.18 | 0.2 | 0.22 | 0.24 | 0.26 | 0.3 | 0.33 | 0.35 | |
| Κ2 | Συμπυκνωμένος γραφιτικός σίδηρος (CGI) | 120-290 | <32 | 100 | 0.12 | 0.15 | 0.18 | 0.2 | 0.22 | 0.24 | 0.26 | 0.3 | 0.33 | 0.35 | ||
| Κ3 | Ελατό χυτοσίδηρο | 130-260 | <28 | 100 | 0.12 | 0.15 | 0.18 | 0.2 | 0.22 | 0.24 | 0.26 | 0.3 | 0.33 | 0.35 | ||
| Κ4 | Όλκιμος χυτοσίδηρος | 180-350 | <43 | 90 | 0.12 | 0.15 | 0.18 | 0.2 | 0.22 | 0.24 | 0.26 | 0.3 | 0.33 | 0.35 | ||
N | Ν1 | Κράμα αλουμινίου-πυριτίου, περιεκτικότητα σε πυρίτιο <9% | 60-90 | 120 | 0.12 | 0.15 | 0.18 | 0.2 | 0.22 | 0.24 | 0.26 | 0.3 | 0.33 | 0.35 | ||
| Ν2 | Κράμα πυριτίου-αλουμινίου, 9% | 70-100 | 120 | 0.12 | 0.15 | 0.18 | 0.2 | 0.22 | 0.24 | 0.26 | 0.3 | 0.33 | 0.35 | |||
| Ν3 | Κράμα πυριτίου-αλουμινίου, περιεκτικότητα σε πυρίτιο>16% | 90-150 | 120 | 0.12 | 0.15 | 0.18 | 0.2 | 0.22 | 0.24 | 0.26 | 0.3 | 0.33 | 0.35 | |||
| Ν4 | Χυτό κράμα αλουμινίου | 60-120 | 120 | 0.12 | 0.15 | 0.18 | 0.2 | 0.22 | 0.24 | 0.26 | 0.3 | 0.33 | 0.35 | |||
| Ν5 | Σφυρήλατο κράμα αλουμινίου | 60-90 | 120 | 0.12 | 0.15 | 0.18 | 0.2 | 0.22 | 0.24 | 0.26 | 0.3 | 0.33 | 0.35 | |||
| Ν10 | Χαλκός | 120 | 0.12 | 0.15 | 0.18 | 0.2 | 0.22 | 0.24 | 0.26 | 0.3 | 0.33 | 0.35 | ||||
| Ν11 | Κράμα χαλκού | 120-200 | 90 | 0.12 | 0.15 | 0.18 | 0.2 | 0.22 | 0.24 | 0.26 | 0.3 | 0.33 | 0.35 | |||
Center Drill Application Cases
Automotive Transmission Housing Manufacturing
Φόντο
An automotive supplier produces alloy steel transmission housings, and high-precision hole positioning is essential before creating over 2000 mounting holes per batch to ensure consistent hole positions.
Πρόκληση
- Τεμάχιο εργασίας: Automotive Transmission Housing
- Υλικό: 42CrMo4 Alloy Steel
- Σκληρότητα: 28–32 HRC
- Τύπος τρύπας: 90° Spot Holes and Through Holes
- Βάθος τρύπας: Spotting Depth 1.2 mm
- Απαίτηση: Stable drilling performance with excellent position accuracy within ±0.03 mm.
Διάλυμα
- Εργαλείο που χρησιμοποιήθηκε: Ø8 mm 90° 2-Flute Carbide Center Drills for Steel (Nano-Blue)
- Τύπος ψυκτικού: Εξωτερικό ψυκτικό υγρό
- Εργαλειομηχανή: Brother SPEEDIO S700X1 Vertical Machining Center
- Ταχύτητα άξονα: 6,000 rpm
- Ρυθμός τροφοδοσίας: 480 mm/min
Αποτελέσματα
Excellent position accuracy can be controlled within ±0.02 mm with surface finishes of approximately Ra 0.8 μm. Compared with conventional TiAlN-coated center drills, our 90° 2-Flute Carbide Center Drills for Steel can achieve about 30% extended tool life.

How JINOO Manufactures Center Drills?
Μηχανές λείανσης ακριβείας CNC
- WALTER Helitronic Power 400L
- WALTER Helitronic Vision 400L
- WALTER Helitronic Micro 400L
- Rollomatic NP5
- ANCA MX5
- ANCA MX7
These world-class CNC grinding machines are mainly applied for delivering edge sharpness, consistent geometry, and dimensional accuracy of center drills with tight tolerances within ±0.002 mm.
- WALTER Helitronic Power 400L
- WALTER Helitronic Vision 400L
- WALTER Helitronic Micro 400L
- Rollomatic NP5
- ANCA MX5
- ANCA MX7
These world-class CNC grinding machines are mainly applied for delivering edge sharpness, consistent geometry, and dimensional accuracy of center drills with tight tolerances within ±0.002 mm.
- WALTER Helitronic Power 400L
- WALTER Helitronic Vision 400L
- WALTER Helitronic Micro 400L
- Rollomatic NP5
- ANCA MX5
- ANCA MX7
These world-class CNC grinding machines are mainly applied for delivering edge sharpness, consistent geometry, and dimensional accuracy of center drills with tight tolerances within ±0.002 mm.
- WALTER Helitronic Power 400L
- WALTER Helitronic Vision 400L
- WALTER Helitronic Micro 400L
- Rollomatic NP5
- ANCA MX5
- ANCA MX7
These world-class CNC grinding machines are mainly applied for delivering edge sharpness, consistent geometry, and dimensional accuracy of center drills with tight tolerances within ±0.002 mm.
- WALTER Helitronic Power 400L
- WALTER Helitronic Vision 400L
- WALTER Helitronic Micro 400L
- Rollomatic NP5
- ANCA MX5
- ANCA MX7
These world-class CNC grinding machines are mainly applied for delivering edge sharpness, consistent geometry, and dimensional accuracy of center drills with tight tolerances within ±0.002 mm.
- WALTER Helitronic Power 400L
- WALTER Helitronic Vision 400L
- WALTER Helitronic Micro 400L
- Rollomatic NP5
- ANCA MX5
- ANCA MX7
These world-class CNC grinding machines are mainly applied for delivering edge sharpness, consistent geometry, and dimensional accuracy of center drills with tight tolerances within ±0.002 mm.
Προηγμένο Σύστημα Ελέγχου Ποιότητας
1.ZOLLER G3 Tool Measurement: Used to perform the verification of the drill geometry and critical dimensions of center drills, such as tool diameters, the point angle and concentricity.
2.PG1000 Optical Inspection: After dimensional verification, we will inspect the cutting edge preparation and tool integrity under the magnification of up to 200×, which can help identify cutting edge defects.
3.Parlec Tool Presetting: Before final shipment, we will inspect the center drill length and clamping positioning precision to control the runout within 3 μm, further ensuring the machine compatibility.
We always utilize the quality inspection system to achieve the comprehensive quality control of our center drills, ensuring their unmatched tool quality and accurate dimensions.
1.ZOLLER G3 Tool Measurement: Used to perform the verification of the drill geometry and critical dimensions of center drills, such as tool diameters, the point angle and concentricity.
2.PG1000 Optical Inspection: After dimensional verification, we will inspect the cutting edge preparation and tool integrity under the magnification of up to 200×, which can help identify cutting edge defects.
3.Parlec Tool Presetting: Before final shipment, we will inspect the center drill length and clamping positioning precision to control the runout within 3 μm, further ensuring the machine compatibility.
We always utilize the quality inspection system to achieve the comprehensive quality control of our center drills, ensuring their unmatched tool quality and accurate dimensions.
1.ZOLLER G3 Tool Measurement: Used to perform the verification of the drill geometry and critical dimensions of center drills, such as tool diameters, the point angle and concentricity.
2.PG1000 Optical Inspection: After dimensional verification, we will inspect the cutting edge preparation and tool integrity under the magnification of up to 200×, which can help identify cutting edge defects.
3.Parlec Tool Presetting: Before final shipment, we will inspect the center drill length and clamping positioning precision to control the runout within 3 μm, further ensuring the machine compatibility.
We always utilize the quality inspection system to achieve the comprehensive quality control of our center drills, ensuring their unmatched tool quality and accurate dimensions.
Υλικό εργαλείου από λεπτόκοκκο καρβίδιο
1.We cooperate with well-renowned raw material suppliers such as GESAC, Kennametal, Sandvik, Gühring, and CB Ceratizit to ensure the stable supply of our carbide substrates.
2.JINOO’s center drills are all manufactured from fine-grain carbide tool material, enabling their high rigidity and wear resistance.
3.Our fine-grain carbide substrates feature the pure structure with 10% to 12% cobalt content.
Παρθένο καρβίδιο αντί για ανακυκλωμένο καρβίδιο
JINOO’s virgin tungsten carbide we use in our center drills:
- Fine grains
- High structural stability
- Extended tool life
- Superior wear resistance
- Higher purity
Competitor’s recycled carbide που χρησιμοποιούνται σε τρυπάνια κακής ποιότητας:
- Ανομοιόμορφο μέγεθος κόκκων
- Πολλές ακαθαρσίες
- Uneven cobalt phase distribution
- Χαλαρή δομή
- Επιρρεπές σε θραύση εργαλείων
Αξιόπιστοι Συνεργάτες Επιστρώσεων
1.JINOO’s center drills are all designed with advanced AITiN coatings from Oerlikon Balzers.
2.We can customize center drills with a wide range of coating selections to suit versatile machining applications.
3.Combined with such high-performance coating technology, our center drills can achieve excellent heat and wear resistance with longer tool life.
Επίστρωση υψηλής απόδοσης έναντι επίστρωσης κακής ποιότητας
Υψηλής ποιότητας επιστρώσεις used in our solid carbide center drills:
- Ισχυρή πρόσφυση
- Tight tolerances
- High density
- No pores
- Higher wear resistance
Competitor’s poor-quality coatings used in low-grade drill bits:
- Αδύναμη πρόσφυση
- Σύσταση άκρων
- Obvious micro-cracks
- Prone to corrosion
- Large performance fluctuations
Σύστημα Διαχείρισης Ποιότητας ISO 9001
- Πιστοποιημένο κατά ISO9001:2008
- Πιστοποιημένο κατά ISO9001:2015
- Πιστοποιημένος κατασκευαστής SGS
- Πιστοποιημένος κατασκευαστής TÜV Rheinland
- Επαληθευμένος προμηθευτής Alibaba.com
- Επαληθευμένος προμηθευτής κατασκευασμένος στην Κίνα
- 1688 πλατφόρμες Επαληθευμένος Προμηθευτής
- Εθνική Επιχείρηση Υψηλής Τεχνολογίας
- Πιστοποίηση προϊόντων υψηλής τεχνολογίας Changzhou
JINOO has passed the globally recognized quality management system verification with the commitment to the production of center drills, ensuring their consistent performance. They are widely exported to North America, Europe, and the Middle East due to our excellent manufacturing capabilities and export qualifications.
- Πιστοποιημένο κατά ISO9001:2008
- Πιστοποιημένο κατά ISO9001:2015
- Πιστοποιημένος κατασκευαστής SGS
- Πιστοποιημένος κατασκευαστής TÜV Rheinland
- Επαληθευμένος προμηθευτής Alibaba.com
- Επαληθευμένος προμηθευτής κατασκευασμένος στην Κίνα
- 1688 πλατφόρμες Επαληθευμένος Προμηθευτής
- Εθνική Επιχείρηση Υψηλής Τεχνολογίας
- Πιστοποίηση προϊόντων υψηλής τεχνολογίας Changzhou
JINOO has passed the globally recognized quality management system verification with the commitment to the production of center drills, ensuring their consistent performance. They are widely exported to North America, Europe, and the Middle East due to our excellent manufacturing capabilities and export qualifications.
- Πιστοποιημένο κατά ISO9001:2008
- Πιστοποιημένο κατά ISO9001:2015
- Πιστοποιημένος κατασκευαστής SGS
- Πιστοποιημένος κατασκευαστής TÜV Rheinland
- Επαληθευμένος προμηθευτής Alibaba.com
- Επαληθευμένος προμηθευτής κατασκευασμένος στην Κίνα
- 1688 πλατφόρμες Επαληθευμένος Προμηθευτής
- Εθνική Επιχείρηση Υψηλής Τεχνολογίας
- Πιστοποίηση προϊόντων υψηλής τεχνολογίας Changzhou
JINOO has passed the globally recognized quality management system verification with the commitment to the production of center drills, ensuring their consistent performance. They are widely exported to North America, Europe, and the Middle East due to our excellent manufacturing capabilities and export qualifications.
- Πιστοποιημένο κατά ISO9001:2008
- Πιστοποιημένο κατά ISO9001:2015
- Πιστοποιημένος κατασκευαστής SGS
- Πιστοποιημένος κατασκευαστής TÜV Rheinland
- Επαληθευμένος προμηθευτής Alibaba.com
- Επαληθευμένος προμηθευτής κατασκευασμένος στην Κίνα
- 1688 πλατφόρμες Επαληθευμένος Προμηθευτής
- Εθνική Επιχείρηση Υψηλής Τεχνολογίας
- Πιστοποίηση προϊόντων υψηλής τεχνολογίας Changzhou
JINOO has passed the globally recognized quality management system verification with the commitment to the production of center drills, ensuring their consistent performance. They are widely exported to North America, Europe, and the Middle East due to our excellent manufacturing capabilities and export qualifications.
- Πιστοποιημένο κατά ISO9001:2008
- Πιστοποιημένο κατά ISO9001:2015
- Πιστοποιημένος κατασκευαστής SGS
- Πιστοποιημένος κατασκευαστής TÜV Rheinland
- Επαληθευμένος προμηθευτής Alibaba.com
- Επαληθευμένος προμηθευτής κατασκευασμένος στην Κίνα
- 1688 πλατφόρμες Επαληθευμένος Προμηθευτής
- Εθνική Επιχείρηση Υψηλής Τεχνολογίας
- Πιστοποίηση προϊόντων υψηλής τεχνολογίας Changzhou
JINOO has passed the globally recognized quality management system verification with the commitment to the production of center drills, ensuring their consistent performance. They are widely exported to North America, Europe, and the Middle East due to our excellent manufacturing capabilities and export qualifications.
- Πιστοποιημένο κατά ISO9001:2008
- Πιστοποιημένο κατά ISO9001:2015
- Πιστοποιημένος κατασκευαστής SGS
- Πιστοποιημένος κατασκευαστής TÜV Rheinland
- Επαληθευμένος προμηθευτής Alibaba.com
- Επαληθευμένος προμηθευτής κατασκευασμένος στην Κίνα
- 1688 πλατφόρμες Επαληθευμένος Προμηθευτής
- Εθνική Επιχείρηση Υψηλής Τεχνολογίας
- Πιστοποίηση προϊόντων υψηλής τεχνολογίας Changzhou
JINOO has passed the globally recognized quality management system verification with the commitment to the production of center drills, ensuring their consistent performance. They are widely exported to North America, Europe, and the Middle East due to our excellent manufacturing capabilities and export qualifications.
- Πιστοποιημένο κατά ISO9001:2008
- Πιστοποιημένο κατά ISO9001:2015
- Πιστοποιημένος κατασκευαστής SGS
- Πιστοποιημένος κατασκευαστής TÜV Rheinland
- Επαληθευμένος προμηθευτής Alibaba.com
- Επαληθευμένος προμηθευτής κατασκευασμένος στην Κίνα
- 1688 πλατφόρμες Επαληθευμένος Προμηθευτής
- Εθνική Επιχείρηση Υψηλής Τεχνολογίας
- Πιστοποίηση προϊόντων υψηλής τεχνολογίας Changzhou
JINOO has passed the globally recognized quality management system verification with the commitment to the production of center drills, ensuring their consistent performance. They are widely exported to North America, Europe, and the Middle East due to our excellent manufacturing capabilities and export qualifications.
- Πιστοποιημένο κατά ISO9001:2008
- Πιστοποιημένο κατά ISO9001:2015
- Πιστοποιημένος κατασκευαστής SGS
- Πιστοποιημένος κατασκευαστής TÜV Rheinland
- Επαληθευμένος προμηθευτής Alibaba.com
- Επαληθευμένος προμηθευτής κατασκευασμένος στην Κίνα
- 1688 πλατφόρμες Επαληθευμένος Προμηθευτής
- Εθνική Επιχείρηση Υψηλής Τεχνολογίας
- Πιστοποίηση προϊόντων υψηλής τεχνολογίας Changzhou
JINOO has passed the globally recognized quality management system verification with the commitment to the production of center drills, ensuring their consistent performance. They are widely exported to North America, Europe, and the Middle East due to our excellent manufacturing capabilities and export qualifications.
- Πιστοποιημένο κατά ISO9001:2008
- Πιστοποιημένο κατά ISO9001:2015
- Πιστοποιημένος κατασκευαστής SGS
- Πιστοποιημένος κατασκευαστής TÜV Rheinland
- Επαληθευμένος προμηθευτής Alibaba.com
- Επαληθευμένος προμηθευτής κατασκευασμένος στην Κίνα
- 1688 πλατφόρμες Επαληθευμένος Προμηθευτής
- Εθνική Επιχείρηση Υψηλής Τεχνολογίας
- Πιστοποίηση προϊόντων υψηλής τεχνολογίας Changzhou
JINOO has passed the globally recognized quality management system verification with the commitment to the production of center drills, ensuring their consistent performance. They are widely exported to North America, Europe, and the Middle East due to our excellent manufacturing capabilities and export qualifications.
Τεχνική Υποστήριξη & Βελτιστοποίηση Εργαλείων
1.JINOO keeps optimizing the center drills based on continuous case study and customers’ feedback.
2.JINOO will provide you with comprehensive regrinding services. After 3 times regrinding, your tooling costs can be decreased by up to 38%.
3.We will offer you prompt after-sales technical support to ensure your user experience.
Μαρτυρίες
FAQ about Center Drills
What workpiece materials can your solid carbide center drills process?
Our carbide center drills are designed for universal machining purposes. There are widely available workpiece materials, including Steel Parts (P), Stainless Steel (M), Non-ferrous Metal (N), and High-temperature Alloy (S). Our larger polished HELICA flutes, combined with coating technology, enable our solid carbide center drills to gain significant performance on various workpieces.
With rich experiences, we can also achieve the perfect balance between standard and customization for CNC spotting drill bits to meet various unique demands.
What is a center drill for?
Our carbide center drills are designed for machining stainless steel and difficult-to-process materials. Due to the short flute length and prominent apex angle features of spotting drills, they are rigid enough to drill hard materials, especially stainless steel. Our unique CNC center drills significantly improve later machining efficiency and extend the tool’s lifespan.
How can coating technology enhance the performance of Center Drills?
The unique geometry design of our 90-degree carbide center drills and 120-degree carbide center drills, combined with advanced coating technology like TiN, can promote reduced chip accumulation during precise positioning and increase the center drill bit lifespan.
Spot drills can’t replace center drills due to their different machining purposes. Spot drills are mainly used for machining starting points before drilling. However, center drills are more suitable for creating center holes due to their robust tool body and short cutting lengths.
Center drills are primarily applied for producing precision starting points and center holes before subsequent machining. They can significantly decrease tool deflection to ensure accurate positioning. However, regular drills are mainly used for drilling operations with higher material removal rates.
The design and quality of the Center Drills are critical factors that will impact the machining efficiency. In addition, other external factors should also be considered during the operation process.
Be cautious about the irregularities in the materials, which apply to both bar stock raw materials and machined materials. Any of these failures will increase the damage to the carbide center drills and render the machining ineffective. Flex in the drill is also a factor in the failure of the tools. The pointed tip might be away from the central axis line without the proper machining, leading to the position hole not being central, subsequent eccentric cutting of the main drill, and large hole tolerance variations. Always remember that the Center Drills are only used for “precise positioning” rather than materials removal and drilling purposes.
It is important to have the proper methods for using Center Drills, especially if you want to achieve excellent pre-drilling operations and perfect protection for the following carbide drills.
It is critical to remember that Center Drills are used for pre-positioning to prevent the drill from walking and improve the hole’s accuracy and coaxiality.
Step 1: Choose the correct angle for the carbide center drills.
Step 2: Ensure the solid carbide drill bits are aligned and securely clamped.
Step 3: Check the relevant specifications, like the center drills’ rotation speed and feed rate.
Step 4: Control the drilling depth of spot drills, usually 0.5x-1x, with the diameter of the center drill.
Step 5: Confirm the purpose of further drilling; the main drills should be positioned at the central point.
Center drills and carbide spot drills should maintain shallow drilling depths as they are only used for hole positioning. We recommend you drill with the recommended spotting depths between 0.3D and 0.6D of the drill bit diameter to avoid excessive cutting forces. Less tool wandering and hole positioning accuracy can be ensured with the correct drilling depths.
The best cutting speeds of center drills depend on the workpiece material and drill bit diameters. Higher spindle speeds are recommended for solid carbide CN center drills. For example, 3000 to 6000 RPM should be used for small-diameter workpieces in machining steel parts. Higher spindle speeds should be used for machining aluminum. Proper cutting speeds can promote accurate hole positioning and decrease tool vibration.
Επικοινωνήστε με την ομάδα πωλήσεών μας ή συνδεθείτε για να μάθετε για όλες τις επιλογές τιμολόγησης που έχετε.
ΣΧΕΤΙΚΑ ΜΕ ΕΜΑΣ
JINOO Tools Group is a “National High-Tech Enterprise”, which was founded in 2006 and specializes in manufacturing high-precision solid carbide cutting tools with over 25,000㎡ manufacturing bases. Our center drills are widely used in the automotive, aerospace, and equipment manufacturing industries. We have accumulated over 50 national patents and passed the ISO:9001 certification, devoted to creating high-value cutting solutions for our customers.
Κατάλογος προϊόντων
Σενάρια εφαρμογής

Σχετικά προϊόντα

Επίστρωση: HELICA
Βάθος κοπής: 3×D
Βάθος κοπής: 5×D
Εξωτερικό ψυκτικό υγρό
Εσωτερικό ψυκτικό υγρό
Πλευρά μηχανής: DIN 6535 HA
Ανοχή: M7
Γωνία σημείου: 140°
Πρότυπο: DIN 6535-HA

Επίστρωση: HELICA
Βάθος κοπής: 3×D
Βάθος κοπής: 5×D
Εξωτερικό ψυκτικό υγρό
Εσωτερικό ψυκτικό υγρό
Πλευρά μηχανής: DIN 6535 HA
Ανοχή: M7
Γωνία σημείου: 140°
Πρότυπο: DIN 6535-HA

Επίστρωση: AITiN-νανοεπίστρωση
Βάθος κοπής: 3×D
Βάθος κοπής: 5×D
Βάθος κοπής: 8×D
Βάθος κοπής: 12×D
Εξωτερικό ψυκτικό υγρό
Εσωτερικό ψυκτικό υγρό
Πλευρά μηχανής: DIN 6535 HA
Ανοχή: M7
Γωνία σημείου: 140°
Πρότυπο: DIN 6535-HA

Επίστρωση: HELICA
Βάθος κοπής: 3×D
Εξωτερικό ψυκτικό υγρό
Εσωτερικό ψυκτικό υγρό
Πλευρά μηχανής: DIN 6535 HA
Ανοχή: M7
Γωνία σημείου: 140°
Πρότυπο: DIN 6535-HA

Βάθος κοπής: 5×D
Εξωτερικό ψυκτικό υγρό
Εσωτερικό ψυκτικό υγρό
Πλευρά μηχανής: DIN 6535 HA
Ανοχή: M7
Γωνία σημείου: 140°
Πρότυπο: DIN 6535-HA

Επίστρωση: TiAISiN
Βάθος κοπής: 3×D
Βάθος κοπής: 5×D
Εσωτερικό ψυκτικό υγρό
Πλευρά μηχανής: DIN 6535 HA
Ανοχή: M7
Γωνία σημείου: 140°
Πρότυπο: DIN 6535-HA

Επίστρωση: AITiN-νανοεπίστρωση
Βάθος κοπής: 15×D
Βάθος κοπής: 20×D
Βάθος κοπής: 25×D
Βάθος κοπής: 30×D
Βάθος κοπής: 40×D
Εσωτερικό ψυκτικό υγρό
Πλευρά μηχανής: DIN 6535 HA
Ανοχή: H7
Γωνία σημείου: 135°
Πρότυπο: DIN 6535-HA

Επίστρωση: AITiN-νανοεπίστρωση
Βάθος κοπής: 3×D
Βάθος κοπής: 5×D
Εξωτερικό ψυκτικό υγρό
Εσωτερικό ψυκτικό υγρό
Πλευρά μηχανής: DIN 6535 HA
Ανοχή: M7
Γωνία σημείου: 130°
Πρότυπο: DIN 6535-HA





























































