Drill Bit for Stainless Steel Design Highlights
- Massief hardmetalen constructie
- Oerlikon TiAISiN Coating Technology
- 140° Split Point Design
- Cutting Edge Preparation
- G-Type Flute Geometry
- Double Margin Design
Drill Bit for Stainless Steel Types

3×D Internal Coolant Straight Shank Twist Drill
Stable cutting performance with improved hole accuracy and tool rigidity.

P: Staal
M: Roestvrij staal
N: Non-ferro
S: Superalloy
H: Hardened Steel
2 fluiten
3×D
Intern koelvloeistofsysteem
Oerlikon TiAISiN Coating
DIN 6535-HA
Rechte schacht
Boren
Rechtshandig snijden
140° Point Angle
Massief hardmetalen constructie
M7

5×D Internal Coolant Straight Shank Twist Drill
Deeper hole machining with smooth chip evacuation.

P: Staal
M: Roestvrij staal
N: Non-ferro
S: Superalloy
H: Hardened Steel
2 fluiten
5×D
Intern koelvloeistofsysteem
Oerlikon TiAISiN Coating
DIN 6535-HA
Rechte schacht
Boren
Rechtshandig snijden
140° Point Angle
Massief hardmetalen constructie
M7

8×D Internal Coolant Straight Shank Twist Drill
Stable deep-hole drilling with internal coolant efficiency.

P: Staal
M: Roestvrij staal
N: Non-ferro
S: Superalloy
H: Hardened Steel
2 fluiten
8×D
Oerlikon TiAISiN Coating
Intern koelvloeistofsysteem
DIN 6535-HA
Rechte schacht
Boren
Rechtshandig snijden
140° Point Angle
Massief hardmetalen constructie
M7
Why Choose Our Drill Bits for Stainless Steel?
For our D2600 series internal coolant carbide drill bits for stainless steel, JINOO has introduced innovative features for our latest geometry design, each unique and brand-protective in the market.

Massief hardmetalen constructie
Our solid carbide drill bits for stainless steel are manufactured from 0.4μm fine-grain carbide substrates with consistent hardness and toughness.

Oerlikon TiAISiN Coating Technology
We apply the high-performance TiAISiN coating with high coating adhesion and uniform surfaces to improve the performance of drill bits for stainless steel.

140° Split Point Design
Our drill bits for stainless steel are designed with the 140° split point geometry, which features a precisely ground chisel edge.

Cutting Edge Preparation
The micro-honed cutting edges of drill bits for stainless steel are engineered with the micro-chamfer geometry design.

G-Type Flute Geometry
The G-type flutes are designed with a unique helix profile and precisely ground chip channels.

Double Margin Design
Double margins are designed with precision-ground guide surfaces and optimized margin width.
Drill Bit for Stainless Steel Geometry Breakdown
1.0.4 μm Fine-Grain Carbide Substrate for High Strength
JINOO uses 0.4 μm fine-grain carbide substrates to deliver high transverse rupture strength, enabling minimal edge chipping and extended tool life of drill bits for stainless steel.
2.TiAISiN Coating Technology for Less Tool Wear
Advanced TiAISiN coatings can greatly reduce friction and improve oxidation resistance under extremely high temperatures between 900 and 1000°C to minimize tool wear.
3.140° Split Point Design for Accurate Positioning
The 140° point angle is precisely ground to improve the centering abilities with less axial cutting forces.
4.Cutting Edge Preparation for Minimal Micro-Chipping
Honed cutting edges with a controlled edge radius can balance edge strength and sharpness to minimize edge chipping.
5.G-Type Flute Geometry for Efficient Chip Evacuation
Polished G-Type flutes featuring large chip spaces can improve the chip flow to avoid chip clogging.
6.Double Margin Design for Less Vibration
Double margins can deliver sufficient support to decrease tool vibration and improve hole cylindricity and roundness.
7.30° Helix Angle for Stable Chip Flow
The 30° helix angle balances edge sharpness and strength to promote the stable chip flow and less thermal loading.
8.Short Chisel Edge for Easier Penetration
A short chisel edge can reduce the extrusion zone to lower axial cutting forces and improve penetration.
9.Reinforced Core for Higher Tool Rigidity
The reinforced core can enhance the torsional strength with less tool vibration to deliver higher dimensional stability.
10.Optimized Relief Angle for Surface Finishes
The optimized relief angle can decrease flank contact to lower the friction, improving the hole wall surfaces.

Technische gegevens
| Ultrafijnkorrelig substraat | 0,4 μm |
| Tolerantie | M7 |
| Coating | AlTiN + TiSiN / TiAlSiN-X / AlTiN / TiAlN / TiAlSiN / DLC / AlCrN / AlCrSiN / AlTiSiN / TiSiXN / Maatwerk mogelijk |
| Fluitnummer | 2 |
| Totale lengte | 50 / 60 / 75 / 100 / 150 / 200 mm / Lengte op maat |
| Schachtdiameter | 4 / 6 / 8 / 10 / 12 / 14 / 16 / 18 / 20 mm / Diameter op maat |

Drill Bits for Stainless Steel Specifications
Drill Bits for Stainless Steel Size Range
Carbide substraat
Snelkeuzegids
Aanbevolen snijparameters
| Code | Diameter (mm) | Diameter (in) | Schachtdiameter (inch) | Totale lengte OAL (inch) | Fluitlengte (in) | Schachtlengte (in) | |
| Externe koelvloeistof | Interne koelvloeistof | ||||||
| D2603-NHA-D03175 | D2603-CHA-D03175 | 3.175 | 0.125 | 6 | 62 | 20 | 36 |
| D2603-NHA-D03571 | D2603-CHA-D03571 | 3.571 | 0.1406 | 6 | 62 | 20 | 36 |
| D2603-NHA-D03970 | D2603-CHA-D03970 | 3.97 | 0.1563 | 6 | 66 | 24 | 36 |
| D2603-NHA-D04366 | D2603-CHA-D04366 | 4.366 | 0.1719 | 6 | 66 | 24 | 36 |
| D2603-NHA-D04763 | D2603-CHA-D04763 | 4.763 | 0.1875 | 6 | 66 | 28 | 36 |
| D2603-NHA-D05159 | D2603-CHA-D05159 | 5.159 | 0.2031 | 6 | 66 | 28 | 36 |
| D2603-NHA-D05558 | D2603-CHA-D05558 | 5.558 | 0.2188 | 6 | 66 | 28 | 36 |
| D2603-NHA-D05949 | D2603-CHA-D05949 | 5.949 | 0.2344 | 6 | 66 | 28 | 36 |
| D2603-NHA-D06350 | D2603-CHA-D06350 | 6.35 | 0.25 | 8 | 79 | 34 | 36 |
| D2603-NHA-D06746 | D2603-CHA-D06746 | 6.746 | 0.2656 | 8 | 79 | 34 | 36 |
| D2603-NHA-D07145 | D2603-CHA-D07145 | 7.145 | 0.2813 | 8 | 79 | 41 | 36 |
| D2603-NHA-D07541 | D2603-CHA-D07541 | 7.541 | 0.2969 | 8 | 79 | 41 | 36 |
| D2603-NHA-D07938 | D2603-CHA-D07938 | 7.938 | 0.3125 | 8 | 79 | 41 | 36 |
| D2603-NHA-D08344 | D2603-CHA-D08344 | 8.344 | 0.3281 | 10 | 89 | 47 | 40 |
| D2603-NHA-D08733 | D2603-CHA-D08733 | 8.733 | 0.3438 | 10 | 89 | 47 | 40 |
| D2603-NHA-D09129 | D2603-CHA-D09129 | 9.129 | 0.3594 | 10 | 89 | 47 | 40 |
| D2603-NHA-D09525 | D2603-CHA-D09525 | 9.525 | 0.375 | 10 | 89 | 47 | 40 |
| D2603-NHA-D09921 | D2603-CHA-D09921 | 9.921 | 0.3906 | 10 | 89 | 47 | 40 |
| D2603-NHA-D10320 | D2603-CHA-D10320 | 10.32 | 0.4063 | 12 | 102 | 55 | 45 |
| D2603-NHA-D10716 | D2603-CHA-D10716 | 10.716 | 0.4219 | 12 | 102 | 55 | 45 |
| D2603-NHA-D11111 | D2603-CHA-D11111 | 11.111 | 0.4375 | 12 | 102 | 55 | 45 |
| D2603-NHA-D11509 | D2603-CHA-D11509 | 11.509 | 0.4531 | 12 | 102 | 55 | 45 |
| D2603-NHA-D11908 | D2603-CHA-D11908 | 11.908 | 0.4688 | 12 | 102 | 55 | 45 |
| D2603-NHA-D12300 | D2603-CHA-D12300 | 12.3 | 0.4843 | 14 | 107 | 60 | 45 |
| D2603-NHA-D12700 | D2603-CHA-D12700 | 12.7 | 0.5 | 14 | 107 | 60 | 45 |
| D2603-NHA-D13100 | D2603-CHA-D13100 | 13.1 | 0.5157 | 14 | 107 | 60 | 45 |
| D2603-NHA-D13891 | D2603-CHA-D13891 | 13.891 | 0.5469 | 14 | 107 | 60 | 45 |
| D2603-NHA-D14288 | D2603-CHA-D14288 | 14.288 | 0.5625 | 16 | 115 | 65 | 48 |
| D2603-NHA-D14684 | D2603-CHA-D14684 | 14.684 | 0.5781 | 16 | 115 | 65 | 48 |
| D2603-NHA-D15083 | D2603-CHA-D15083 | 15.083 | 0.5938 | 16 | 115 | 65 | 48 |
| D2603-NHA-D15479 | D2603-CHA-D15479 | 15.479 | 0.6094 | 16 | 115 | 65 | 48 |
| D2603-NHA-D15875 | D2603-CHA-D15875 | 15.875 | 0.625 | 16 | 115 | 65 | 48 |
| D2603-NHA-D17463 | D2603-CHA-D17463 | 17.463 | 0.6875 | 18 | 123 | 73 | 48 |
| D2603-NHA-D19050 | D2603-CHA-D19050 | 19.05 | 0.75 | 20 | 131 | 79 | 50 |
| Code | Diameter (mm) | Diameter (in) | Schachtdiameter (inch) | Totale lengte OAL (inch) | Fluitlengte (in) | Schachtlengte (in) | |
| Externe koelvloeistof | Interne koelvloeistof | ||||||
| D2605-NHA-D03175 | D2605-CHA-D03175 | 3.175 | 0.125 | 6 | 62 | 28 | 36 |
| D2605-NHA-D03571 | D2605-CHA-D03571 | 3.571 | 0.1406 | 6 | 66 | 28 | 36 |
| D2605-NHA-D03970 | D2605-CHA-D03970 | 3.97 | 0.1563 | 6 | 74 | 36 | 36 |
| D2605-NHA-D04366 | D2605-CHA-D04366 | 4.366 | 0.1719 | 6 | 74 | 36 | 36 |
| D2605-NHA-D04763 | D2605-CHA-D04763 | 4.763 | 0.1875 | 6 | 82 | 44 | 36 |
| D2605-NHA-D05159 | D2605-CHA-D05159 | 5.159 | 0.2031 | 6 | 82 | 44 | 36 |
| D2605-NHA-D05558 | D2605-CHA-D05558 | 5.558 | 0.2188 | 6 | 82 | 44 | 36 |
| D2605-NHA-D05949 | D2605-CHA-D05949 | 5.949 | 0.2342 | 6 | 82 | 44 | 36 |
| D2605-NHA-D06350 | D2605-CHA-D06350 | 6.35 | 0.25 | 8 | 91 | 53 | 36 |
| D2605-NHA-D06746 | D2605-CHA-D06746 | 6.746 | 0.2656 | 8 | 91 | 53 | 36 |
| D2605-NHA-D07145 | D2605-CHA-D07145 | 7.145 | 0.2813 | 8 | 91 | 53 | 36 |
| D2605-NHA-D07541 | D2605-CHA-D07541 | 7.541 | 0.2969 | 8 | 91 | 53 | 36 |
| D2605-NHA-D07938 | D2605-CHA-D07938 | 7.938 | 0.3125 | 8 | 91 | 53 | 36 |
| D2605-NHA-D08344 | D2605-CHA-D08344 | 8.344 | 0.3281 | 10 | 103 | 61 | 40 |
| D2605-NHA-D08733 | D2605-CHA-D08733 | 8.733 | 0.3438 | 10 | 103 | 61 | 40 |
| D2605-NHA-D09129 | D2605-CHA-D09129 | 9.129 | 0.3594 | 10 | 103 | 61 | 40 |
| D2605-NHA-D09525 | D2605-CHA-D09525 | 9.525 | 0.375 | 10 | 103 | 61 | 40 |
| D2605-NHA-D09921 | D2605-CHA-D09921 | 9.921 | 0.3906 | 10 | 103 | 61 | 40 |
| D2605-NHA-D10320 | D2605-CHA-D10320 | 10.32 | 0.4063 | 12 | 118 | 71 | 45 |
| D2605-NHA-D10716 | D2605-CHA-D10716 | 10.716 | 0.4219 | 12 | 118 | 71 | 45 |
| D2605-NHA-D11111 | D2605-CHA-D11111 | 11.111 | 0.4374 | 12 | 118 | 71 | 45 |
| D2605-NHA-D11509 | D2605-CHA-D11509 | 11.509 | 0.4531 | 12 | 118 | 71 | 45 |
| D2605-NHA-D11908 | D2605-CHA-D11908 | 11.908 | 0.4688 | 12 | 118 | 71 | 45 |
| D2605-NHA-D12300 | D2605-CHA-D12300 | 12.3 | 0.4843 | 14 | 124 | 77 | 45 |
| D2605-NHA-D12700 | D2605-CHA-D12700 | 12.7 | 0.5 | 14 | 124 | 77 | 45 |
| D2605-NHA-D13100 | D2605-CHA-D13100 | 13.1 | 0.5157 | 14 | 124 | 77 | 45 |
| D2605-NHA-D13891 | D2605-CHA-D13891 | 13.891 | 0.5469 | 14 | 124 | 77 | 45 |
| D2605-NHA-D14288 | D2605-CHA-D14288 | 14.288 | 0.5625 | 16 | 133 | 83 | 48 |
| D2605-NHA-D14684 | D2605-CHA-D14684 | 14.684 | 0.5781 | 16 | 133 | 83 | 48 |
| D2605-NHA-D15083 | D2605-CHA-D15083 | 15.083 | 0.5938 | 16 | 133 | 83 | 48 |
| D2605-NHA-D15479 | D2605-CHA-D15479 | 15.479 | 0.6094 | 16 | 133 | 83 | 48 |
| D2605-NHA-D15875 | D2605-CHA-D15875 | 15.875 | 0.625 | 16 | 133 | 83 | 48 |
| D2605-NHA-D17463 | D2605-CHA-D17463 | 17.463 | 0.6875 | 18 | 143 | 93 | 48 |
| D2605-NHA-D19050 | D2605-CHA-D19050 | 19.05 | 0.75 | 20 | 153 | 101 | 50 |
| Korrelgrootte | Functie | Geschikte materialen | Voordeel |
| 0,2 μ | Ultrafijne korrel, extreem hoge hardheid, zeer scherpe snijkant | Gehard staal (HRC60+), roestvrij staal, titaniumlegeringen, gereedschap met microdiameter | Uitstekende slijtvastheid en scherpe snede, ideaal voor zeer nauwkeurige afwerking, maar met een lagere taaiheid. |
| 0,4 μ | Ultrafijne korrel, uitstekende balans tussen hardheid en taaiheid. | balans tussen hardheid en taaiheid Gehard staal, roestvrij staal, gelegeerd staal, precisievormstaal | Hoge slijtvastheid met goede randstabiliteit, geschikt voor afwerking en semi-afwerking. |
| 0,6 μ | Fijne korrel, gebalanceerde prestaties | Koolstofstaal, gelegeerd staal, roestvrij staal, gietijzer (algemene voorwaarden) | Goede balans tussen slijtvastheid en taaiheid, veelzijdige kwaliteit voor algemeen gebruik. |
| 0,7 μ | Middelfijne korrel, verbeterde taaiheid | Algemeen staal, laaggelegeerd staal, onderbroken snijomstandigheden | Betere weerstand tegen afbrokkeling, geschikt voor semi-voorbewerken en instabiel snijden. |
| 0,8 μ | Middelkorrelig, hoge taaiheid | Laag koolstofstaal, ruwe bewerking, zwaar onderbroken snijden | Hoge slagvastheid, geschikt voor voorbewerken en veeleisende snijbewerkingen. |
| Materialen | Werkstukmaterialen | Type | |
| ISO | |||
P | P1 | Vrij snijdend staal | D2100 / D2200 / D2300 / D2400 / D2600 / D3000 / D5200 / D9100 |
| P2 | Laag koolstofstaal (C<0,25%) | ||
| P4 | Middelmatig koolstofstaal (0,25%), Laaggelegeerd staal | ||
| P5 | Gelegeerd staal, gehard en getemperd staal | ||
| P6 | Hoog koolstofstaal (C>0,6%) | ||
| P11 | Ferritisch roestvrij staal, martensitisch roestvrij staal | ||
H | H5 | Gehard en getemperd staal | D2100 / D2200 / D2300 / D2400 / D2600 / D3000 |
| H7 | Lagerstaal | ||
| H8 | Gereedschapsstaal, snelstaal | ||
| H12 | Gehard roestvrij staal | ||
| H21 | Verzinkt staal | ||
M | M1 | Austenitisch roestvrij staal | D2100 / D2200 / D2400 / D2600 / D3000 / D5200 / D9100 |
| M2 | Hoogwaardig austenitisch roestvrij staal | ||
| M4 | Duplex roestvrij staal | ||
S | S1 | Superlegering op ijzerbasis | D2600 / D9100 |
| S2 | Superlegering op kobaltbasis | ||
| S3 | Nikkelgebaseerde superlegering | ||
| S11 | Titaniumlegering (laaggelegeerd) | ||
| S13 | Titaniumlegering (hooggelegeerd) | ||
K | K1 | Grijs gietijzer | D2100 / D2200 / D2300 / D2400 / D3000 / D5200 / D7200 / D9100 |
| K2 | Verdicht grafietijzer (CGI) | ||
| K3 | Smeedbaar gietijzer | ||
| K4 | Nodulair gietijzer | ||
N | N1 | Aluminium-siliciumlegering, siliciumgehalte <9% | D2500 / D2600 / D5200 / D7200 / D9100 |
| N2 | Silicium-aluminiumlegering, 9% | ||
| N3 | Silicium-aluminiumlegering, siliciumgehalte >16% | ||
| N4 | gegoten aluminiumlegering | ||
| N5 | Gesmeed aluminiumlegering | ||
| N10 | Koper | ||
| N11 | koperlegering | ||
| Materialen | Werkstukmaterialen | Brinell Hardheid | Rockwell Hardheid | Snijsnelheid Vc (m/min) | Voeding per omwenteling fn (mm/omwenteling) | |||||||||||
| ISO | HB | HRC | Extern Koelmiddel | 3 | 4 | 6 | 8 | 10 | 12 | 14 | 16 | 18 | 20 | |||
P | P1 | Vrij snijdend staal | <125 | 80 | 0.07 | 0.1 | 0.13 | 0.16 | 0.18 | 0.2 | 0.22 | 0.25 | 0.28 | 0.3 | ||
| P2 | Laag koolstofstaal (C<0,25%) | <125 | 80 | 0.07 | 0.1 | 0.13 | 0.16 | 0.18 | 0.2 | 0.22 | 0.25 | 0.28 | 0.3 | |||
| P11 | Ferritisch roestvrij staal, martensitisch roestvrij staal | 250-450 | 38-50 | 50 | 0.07 | 0.1 | 0.12 | 0.14 | 0.16 | 0.18 | 0.2 | 0.22 | 0.24 | 0.26 | ||
| H12 | Gehard roestvrij staal | 33-50 | 35 | 0.05 | 0.06 | 0.08 | 0.11 | 0.13 | 0.15 | 0.17 | 0.18 | 0.19 | 0.2 | |||
M | M¹ | Austenitisch roestvrij staal | <150 | 50 | 0.07 | 0.1 | 0.12 | 0.14 | 0.15 | 0.18 | 0.2 | 0.22 | 0.24 | 0.26 | ||
| M2 | Hoogwaardig austenitisch roestvrij staal | 150-230 | 40 | 0.07 | 0.1 | 0.12 | 0.14 | 0.15 | 0.18 | 0.2 | 0.18 | 0.24 | 0.26 | |||
| M4 | Duplex roestvrij staal | 135-275 | 35 | 0.05 | 0.06 | 0.8 | 0.11 | 0.13 | 0.15 | 0.17 | 0.15 | 0.19 | 0.2 | |||
S | S1 | Superlegering op ijzerbasis | 160-280 | 25-48 | 0.04 | 0.05 | 0.06 | 0.08 | 0.1 | 0.12 | 0.14 | 0.15 | 0.16 | 0.2 | ||
| S2 | Superlegering op kobaltbasis | 250-450 | 25-48 | 0.04 | 0.05 | 0.06 | 0.058 | 0.1 | 0.12 | 0.14 | 0.15 | 0.16 | 0.17 | |||
| S3 | Nikkelgebaseerde superlegering | 160-450 | <48 | 0.04 | 0.05 | 0.06 | 0.08 | 0.1 | 0.12 | 0.14 | 0.105 | 0.16 | 0.17 | |||
| S11 | Titaniumlegering (laaggelegeerd) | 250-350 | 33-38 | 0.056 | 0.06 | 0.06 | 0.08 | 0.11 | 0.13 | 0.15 | 0.16 | 0.18 | 0.2 | |||
| S13 | Titaniumlegering (hooggelegeerd) | 300-400 | 38-48 | 0.05 | 0.06 | 0.06 | 0.08 | 0.11 | 0.13 | 0.15 | 0.16 | 0.18 | 0.2 | |||
Drill Bit for Stainless Steel Application Cases
Stainless Steel Hydraulic Manifold Machining
Achtergrond
A precision-machining manufacturer produced stainless steel hydraulic manifolds, and the previously used carbide drill bits could not achieve excellent hole quality and higher production efficiency.
Uitdaging
- Werkstuk: Hydraulic Manifold
- Materiaal: AISI 316 Stainless Steel
- Hardheid: HB 170–190
- Type gat: Through Hole
- Gatdiepte: 3×D
- Vereiste: Superior hole consistency and less tool wear, reducing the overall costs.
Oplossing
- Gebruikt gereedschap: D2600-Series Internal Coolant Straight Shank Twist Drill
- Koelvloeistoftype: Interne koelvloeistof
- Werktuigbouwmachine: DMG MORI CMX 1100 V Vertical Machining Center
- Spindelsnelheid:2,200 rpm
- Voedingssnelheid: 0.18 mm/rev (396 mm/min)
Resultaten
About 66% extended tool life can be achieved with approximately 90% less cycle time. Chip packing can be avoided to improve the hole quality and production efficiency.

How JINOO Manufactures Drill Bits for Stainless Steel?
Precisie CNC-slijpmachines
- WALTER Helitronic Power 400L
- WALTER Helitronic Vision 400L
- WALTER Helitronic Micro 400L
- Rollomatic NP5
- ANCA MX5
- ANCA MX7
These high-precision devices are mainly applied for pre-forming carbide rods and manufacturing drill bits for stainless steel with optimized tool geometry and machining stability.
- WALTER Helitronic Power 400L
- WALTER Helitronic Vision 400L
- WALTER Helitronic Micro 400L
- Rollomatic NP5
- ANCA MX5
- ANCA MX7
These high-precision devices are mainly applied for pre-forming carbide rods and manufacturing drill bits for stainless steel with optimized tool geometry and machining stability.
- WALTER Helitronic Power 400L
- WALTER Helitronic Vision 400L
- WALTER Helitronic Micro 400L
- Rollomatic NP5
- ANCA MX5
- ANCA MX7
These high-precision devices are mainly applied for pre-forming carbide rods and manufacturing drill bits for stainless steel with optimized tool geometry and machining stability.
- WALTER Helitronic Power 400L
- WALTER Helitronic Vision 400L
- WALTER Helitronic Micro 400L
- Rollomatic NP5
- ANCA MX5
- ANCA MX7
These high-precision devices are mainly applied for pre-forming carbide rods and manufacturing drill bits for stainless steel with optimized tool geometry and machining stability.
- WALTER Helitronic Power 400L
- WALTER Helitronic Vision 400L
- WALTER Helitronic Micro 400L
- Rollomatic NP5
- ANCA MX5
- ANCA MX7
These high-precision devices are mainly applied for pre-forming carbide rods and manufacturing drill bits for stainless steel with optimized tool geometry and machining stability.
- WALTER Helitronic Power 400L
- WALTER Helitronic Vision 400L
- WALTER Helitronic Micro 400L
- Rollomatic NP5
- ANCA MX5
- ANCA MX7
These high-precision devices are mainly applied for pre-forming carbide rods and manufacturing drill bits for stainless steel with optimized tool geometry and machining stability.
Geavanceerd kwaliteitsinspectiesysteem
1. ZOLLER G3 Gereedschapsmeting: Applied to perform the verification of the geometry design and dimensions of drill bits for stainless steel, ensuring their measurement tolerances are controlled within ±2 μm.
2.PG1000 Optische inspectie: Used after dimensional verification to make a microscopic analysis of cutting edges and coatings to identify whether there are inconsistencies and micro-chipping.
3. Voorinstellingen van het Parlec-gereedschap: Utilized to inspect the tool length and clamping positioning accuracy to ensure the runout within 3 μm and higher machining repeatability.
We utilize the quality inspection system to achieve comprehensive inspection and quality control of each tool and ensure their dimensional accuracy.
1. ZOLLER G3 Gereedschapsmeting: Applied to perform the verification of the geometry design and dimensions of drill bits for stainless steel, ensuring their measurement tolerances are controlled within ±2 μm.
2.PG1000 Optische inspectie: Used after dimensional verification to make a microscopic analysis of cutting edges and coatings to identify whether there are inconsistencies and micro-chipping.
3. Voorinstellingen van het Parlec-gereedschap: Utilized to inspect the tool length and clamping positioning accuracy to ensure the runout within 3 μm and higher machining repeatability.
We utilize the quality inspection system to achieve comprehensive inspection and quality control of each tool and ensure their dimensional accuracy.
1. ZOLLER G3 Gereedschapsmeting: Applied to perform the verification of the geometry design and dimensions of drill bits for stainless steel, ensuring their measurement tolerances are controlled within ±2 μm.
2.PG1000 Optische inspectie: Used after dimensional verification to make a microscopic analysis of cutting edges and coatings to identify whether there are inconsistencies and micro-chipping.
3. Voorinstellingen van het Parlec-gereedschap: Utilized to inspect the tool length and clamping positioning accuracy to ensure the runout within 3 μm and higher machining repeatability.
We utilize the quality inspection system to achieve comprehensive inspection and quality control of each tool and ensure their dimensional accuracy.
Fijnkorrelig hardmetaal gereedschapsmateriaal
1.JINOO ensures our customers with high-quality carbide tool material sourced from globally recognized suppliers such as GESAC, Kennametal, Sandvik, Gühring, and CB Ceratizit.
2.Featuring high-rigidity carbide substrates, our drill bits for stainless steel can deliver higher heat and wear resistance.
3.The cobalt content in our tungsten carbide substrates is ensured from 10% to 12%.
4.The tool service life of drill bits for stainless steel can be increased by over 1.5 times.
Nieuw hardmetaal in plaats van gerecycled hardmetaal
JINOO’s virgin tungsten carbide used in drill bits for stainless steel:
- Uniforme korrelgrootte
- No voids
- Higher wear resistance
- Stable lifespan
- High purity
Competitor’s recycled carbide used in manufacturing cheap drills:
- Ongelijkmatige korrelgrootte
- Many defects
- Unstable structure
- Losse structuur
- Premature tool wear
- Korte levensduur van het gereedschap
Betrouwbare coatingpartners
1.JINOO’s drill bits for stainless steel are combined with high-performance TiAISiN coatings from Oerlikon Balzers.
2.We can offer you a wide range of coatings to be combined with drill bits for stainless steel.
3.All the durable coatings feature high density and pure structure to deliver excellent heat and wear resistance.
4.These durable coatings can help carbide drill bits for stainless steel resist premature tool wear.
Hoogwaardige coating versus coating van lage kwaliteit
Hoogwaardige coatings used in our drill bits for stainless steel:
- High heat-resistance
- No peeling
- Small tolerances
- Vrij van poriën
- Superior stability
Competitor’s poor-quality coatings used in low-grade drill bits:
- Kan gemakkelijk afbladderen
- Localized thinning
- Obvious microcracks
- Poor interlayer bonding
- Significant color difference
ISO 9001 kwaliteitsmanagementsysteem
- ISO9001:2008 gecertificeerd
- ISO9001:2015 gecertificeerd
- SGS-gekwalificeerde fabrikant
- TÜV Rheinland gekwalificeerde fabrikant
- Geverifieerde leverancier op Alibaba.com
- Geverifieerde leverancier, Made-in-China
- 1688 platforms Geverifieerde leverancier
- Nationale hightechonderneming
- Changzhou Hightech Product Certificering
JINOO operates under the internationally recognized quality management system, which reveals our standardized production and strict quality control of drill bits for stainless steel. We always achieve compliance with globally respected production and quality standards with excellent tool consistency.
- ISO9001:2008 gecertificeerd
- ISO9001:2015 gecertificeerd
- SGS-gekwalificeerde fabrikant
- TÜV Rheinland gekwalificeerde fabrikant
- Geverifieerde leverancier op Alibaba.com
- Geverifieerde leverancier, Made-in-China
- 1688 platforms Geverifieerde leverancier
- Nationale hightechonderneming
- Changzhou Hightech Product Certificering
JINOO operates under the internationally recognized quality management system, which reveals our standardized production and strict quality control of drill bits for stainless steel. We always achieve compliance with globally respected production and quality standards with excellent tool consistency.
- ISO9001:2008 gecertificeerd
- ISO9001:2015 gecertificeerd
- SGS-gekwalificeerde fabrikant
- TÜV Rheinland gekwalificeerde fabrikant
- Geverifieerde leverancier op Alibaba.com
- Geverifieerde leverancier, Made-in-China
- 1688 platforms Geverifieerde leverancier
- Nationale hightechonderneming
- Changzhou Hightech Product Certificering
JINOO operates under the internationally recognized quality management system, which reveals our standardized production and strict quality control of drill bits for stainless steel. We always achieve compliance with globally respected production and quality standards with excellent tool consistency.
- ISO9001:2008 gecertificeerd
- ISO9001:2015 gecertificeerd
- SGS-gekwalificeerde fabrikant
- TÜV Rheinland gekwalificeerde fabrikant
- Geverifieerde leverancier op Alibaba.com
- Geverifieerde leverancier, Made-in-China
- 1688 platforms Geverifieerde leverancier
- Nationale hightechonderneming
- Changzhou Hightech Product Certificering
JINOO operates under the internationally recognized quality management system, which reveals our standardized production and strict quality control of drill bits for stainless steel. We always achieve compliance with globally respected production and quality standards with excellent tool consistency.
- ISO9001:2008 gecertificeerd
- ISO9001:2015 gecertificeerd
- SGS-gekwalificeerde fabrikant
- TÜV Rheinland gekwalificeerde fabrikant
- Geverifieerde leverancier op Alibaba.com
- Geverifieerde leverancier, Made-in-China
- 1688 platforms Geverifieerde leverancier
- Nationale hightechonderneming
- Changzhou Hightech Product Certificering
JINOO operates under the internationally recognized quality management system, which reveals our standardized production and strict quality control of drill bits for stainless steel. We always achieve compliance with globally respected production and quality standards with excellent tool consistency.
- ISO9001:2008 gecertificeerd
- ISO9001:2015 gecertificeerd
- SGS-gekwalificeerde fabrikant
- TÜV Rheinland gekwalificeerde fabrikant
- Geverifieerde leverancier op Alibaba.com
- Geverifieerde leverancier, Made-in-China
- 1688 platforms Geverifieerde leverancier
- Nationale hightechonderneming
- Changzhou Hightech Product Certificering
JINOO operates under the internationally recognized quality management system, which reveals our standardized production and strict quality control of drill bits for stainless steel. We always achieve compliance with globally respected production and quality standards with excellent tool consistency.
- ISO9001:2008 gecertificeerd
- ISO9001:2015 gecertificeerd
- SGS-gekwalificeerde fabrikant
- TÜV Rheinland gekwalificeerde fabrikant
- Geverifieerde leverancier op Alibaba.com
- Geverifieerde leverancier, Made-in-China
- 1688 platforms Geverifieerde leverancier
- Nationale hightechonderneming
- Changzhou Hightech Product Certificering
JINOO operates under the internationally recognized quality management system, which reveals our standardized production and strict quality control of drill bits for stainless steel. We always achieve compliance with globally respected production and quality standards with excellent tool consistency.
- ISO9001:2008 gecertificeerd
- ISO9001:2015 gecertificeerd
- SGS-gekwalificeerde fabrikant
- TÜV Rheinland gekwalificeerde fabrikant
- Geverifieerde leverancier op Alibaba.com
- Geverifieerde leverancier, Made-in-China
- 1688 platforms Geverifieerde leverancier
- Nationale hightechonderneming
- Changzhou Hightech Product Certificering
JINOO operates under the internationally recognized quality management system, which reveals our standardized production and strict quality control of drill bits for stainless steel. We always achieve compliance with globally respected production and quality standards with excellent tool consistency.
- ISO9001:2008 gecertificeerd
- ISO9001:2015 gecertificeerd
- SGS-gekwalificeerde fabrikant
- TÜV Rheinland gekwalificeerde fabrikant
- Geverifieerde leverancier op Alibaba.com
- Geverifieerde leverancier, Made-in-China
- 1688 platforms Geverifieerde leverancier
- Nationale hightechonderneming
- Changzhou Hightech Product Certificering
JINOO operates under the internationally recognized quality management system, which reveals our standardized production and strict quality control of drill bits for stainless steel. We always achieve compliance with globally respected production and quality standards with excellent tool consistency.
Technische ondersteuning en tooloptimalisatie
1.JINOO insists on optimizing the tool selection of drill bits for stainless steel for versatile machining applications.
2.Dimensional accuracy and tight tolerances can be ensured with our regrinding services, and tooling costs can be saved up to 38% after 3 times regrinding.
3.JINOO provides you with comprehensive technical support and reliable after-sales service.
Getuigenissen
FAQ about Drill Bits for Stainless Steel
Did you accept OEM for non-standard products of the D2600 series?
As an experienced solid carbide drill supplier, we can fully support OEM and ODM non-standard product customization for carbide drill bits for stainless steel in CNC machining. Our standard cutting diameter was between 3mm and 20mm. If you need the above or below, please share it with us. JINOO’s engineers and technical teams will help you design the best drill bits for stainless steel according to your demand.
How could you guarantee the quality of stainless steel drill bits?
Product quality has always been our priority. For each of the Drill Bits for Stainless Steel, we will pass over 32 different quality check procedures, from the appearance check to the detailed parameters and specifications. We will conveniently record each step into our ERP-integrated system for further tracking. Besides, JINOO has passed the ISO9001:2008 and ISO9001:2015 quality standard approval. To meet your expectations, we have invested 100 million in inspection machinery to ensure that each of our Drill Bits for Stainless Steel is free of defects.
What is your MOQ, the production line, and the lead time?
For our standard D2600-Series Drill Bits for Stainless Steel, we have an MOQ of 10 pieces. However, if you want customized tools according to your demand, the MOQ will vary greatly depending on the specific design and configurations of the tools. You need to pay the design fees in advance. We will refund you when you make the formal order. If it’s just a minor adjustment, there’s no extra charge, and the MOQ will be 15 to 20. Our production times for the tools will be between 7 and 15 days because we need to import the bar stocks from Germany to support the production. For the lead time, we collaborate with an internationally well-known logistics company to ensure the timely delivery.
Although the initial cost of high-speed steel drill bits is lower than that of solid carbide drill bits, they are more prone to excessive tool wear in drilling stainless steel. JINOO’s solid carbide drill bits for stainless steel are specialized for machining harder materials like stainless steel, and they can maintain sharpness for a longer time even under high cutting loads. Carbide drill bits for steel are the optimal choice when higher efficiency and lower cost per hole are required.
Many drill bits are made from various materials for machining stainless steel. Different materials give Drill Bits for Stainless Steel different performance and adaptability. The cobalt drill bit for stainless steel can significantly improve the wear-resistance ability and durability, enabling the tools to keep working and preventing quick dulling. The solid carbide drill bits for aluminum are the preferred type for most manufacturers. They are made of tungsten carbide to achieve superior hardness and heat-resistance, supporting higher feed rates and rotation speeds of the tools. Combined with our sharp cutting edges, they will prevent tool breakage during the machining.
The coating is crucial for all the drill bits, no matter what kinds of materials are being machined. JINOO has collaborated with Oerlikon Balzers to provide professional coating technology support. We have over 30 different coating options for our clients to choose from. We have applied the special PVD AITiN and TiAIN coating to increase the durability, wear resistance, and lifespan of our D2600-Series Drill Bits for Stainless Steel. The durable coating provides an antioxidant capacity of 1100 degrees.
Drill Bits for Stainless Steel have always had two different drill tip point angles: 135° and 140°. JINOO’s latest D2600-Series Drill Bits for Stainless Steel have applied the 140° blunt tip, which offers the unique crack chip breaker edge type. Combined with the 30° helix angle, they can achieve more effective drilling under high-speed machining scenarios. However, JINOO has also fully supported the 135° split blade tip for our clients to choose if they have special requirements.
- Using improper cutting speeds. Machining stainless steel will cause high heat generation. Excessive cutting speeds will damage cutting edges.
- Using insufficient coolants. Proper lubrication and coolants are crucial for drilling deep holes. Chip adhesion may lead to work hardening without coolants.
- Avoid using standard high-speed steel drill bits, which will lead to rapid tool wear. Solid carbide drill bits for stainless steel with internal coolant technology will deliver superior heat resistance and chip evacuation.
Drilling work-hardened stainless steel requires precise control of cutting parameters and proper cutting tools. You should choose high-performance solid carbide drill bits for stainless steel, featuring sharp cutting edges. Moreover, stable feeds and speeds are also important. To achieve optimal cutting performance, you need to use sufficient coolants.
Neem contact op met ons verkoopteam of log in om al uw prijsopties te bekijken.
OVER ONS
JINOO Tools Group is a “National High-Tech Enterprise”, which was founded in 2006 and specializes in manufacturing high-precision solid carbide cutting tools with over 25,000㎡ manufacturing bases. Our cutting tools, such as drill bits for stainless steel, are widely used in the automotive, aerospace, and equipment manufacturing industries. We have accumulated over 50 national patents and passed the ISO:9001 certification, devoted to creating high-value cutting solutions for our customers.
Productcatalogus
Toepassingsscenario's

Gerelateerde producten

Coating: HELICA
Zaagdiepte: 3×D
Zaagdiepte: 5×D
Externe koelvloeistof
Interne koelvloeistof
Machinezijde: DIN 6535 HA
Tolerantie: M7
Punthoek: 140°
Norm: DIN 6535-HA

Coating: HELICA
Zaagdiepte: 3×D
Zaagdiepte: 5×D
Externe koelvloeistof
Interne koelvloeistof
Machinezijde: DIN 6535 HA
Tolerantie: M7
Punthoek: 140°
Norm: DIN 6535-HA

Coating: AITiN-nanocoating
Zaagdiepte: 3×D
Zaagdiepte: 5×D
Zaagdiepte: 8×D
Zaagdiepte: 12×D
Externe koelvloeistof
Interne koelvloeistof
Machinezijde: DIN 6535 HA
Tolerantie: M7
Punthoek: 140°
Norm: DIN 6535-HA

Coating: HELICA
Zaagdiepte: 3×D
Externe koelvloeistof
Interne koelvloeistof
Machinezijde: DIN 6535 HA
Tolerantie: M7
Punthoek: 140°
Norm: DIN 6535-HA

Zaagdiepte: 5×D
Externe koelvloeistof
Interne koelvloeistof
Machinezijde: DIN 6535 HA
Tolerantie: M7
Punthoek: 140°
Norm: DIN 6535-HA

Coating: AITiN-nanocoating
Zaagdiepte: 15×D
Zaagdiepte: 20×D
Zaagdiepte: 25×D
Zaagdiepte: 30×D
Zaagdiepte: 40×D
Interne koelvloeistof
Machinezijde: DIN 6535 HA
Tolerantie: H7
Punthoek: 135°
Norm: DIN 6535-HA

Coating: AITiN-nanocoating
Zaagdiepte: 3×D
Zaagdiepte: 5×D
Externe koelvloeistof
Interne koelvloeistof
Machinezijde: DIN 6535 HA
Tolerantie: M7
Point Angle: 130°
Norm: DIN 6535-HA

Coating: AITiN
Zaagdiepte: 3×D
Externe koelvloeistof
Machinezijde: DIN 6535 HA
Tolerantie: M7
Punthoek: 150°
Norm: DIN 6535-HA




























































