REAMING TOOLS

Solid Carbide Reaming Tools for Accurate Reaming.

Reaming Tool Design Highlights

UMG Carbide Substrate
Multi-Land Margin Design
Cutting Edge Preparation
Optimized Flute Geometry
Unequal Pitch Design
Unique Chamfer Design

Wyślij zapytanie teraz

Reaming Tool Types

Rozwiertak maszynowy

Our solid carbide machine reamers can deliver tight tolerances with high rigidity and wear resistance.

P: Stal
M: Stal nierdzewna
K: Żeliwo
H: Hardened Steel
Fine-grain carbide tool material
DIN 6535HA Stanadrd
Trzonek cylindryczny
Reaming

Rozwiertak spiralny

Solid carbide spiral flute reamers feature a spiral flute design to promote chip evacuation with less vibration and higher hole accuracy when reaming blind holes.

P: Stal
M: Stal nierdzewna
N: Metale nieżelazne
Fine-grain carbide tool material
DIN 6535HA Stanadrd
Trzonek cylindryczny
Reaming

Rozwiertak do rowków prostych

Straight flute reamers are designed with straight flutes to deliver cutting stability in reaming through holes.

P: Stal
K: Żeliwo
N: Metale nieżelazne
Fine-grain carbide tool material
DIN 6535HA Stanadrd
Trzonek cylindryczny
Reaming

Regulowany rozwiertak

Our adjustable reamers are designed with an adjustable diameter design to be flexible for low-volume reaming with high cost-efficiency and accuracy.

P: Stal
M: Stal nierdzewna
Fine-grain carbide tool material
DIN 6535HA Stanadrd
Trzonek cylindryczny
Reaming

Rozwiertak stożkowy

Taper reamers are designed for taper hole reaming with accurate alignment and surface finishes.

P: Stal
K: Żeliwo
N: Metale nieżelazne
Fine-grain carbide tool material
DIN 6535HA Stanadrd
Trzonek cylindryczny
Reaming

JINOO

Why Choose Our Reaming Tools?

Our carbide reamers are used for finishing holes with superior dimensional accuracy of H7 and H8 tolerances.

UMG Carbide Substrate

Our reaming tools are manufactured from 0.2μm ultra-fine grain carbide with a uniform grain structure and excellent density.

Multi-Land Margin Design

4 to 8 guide margins are typically distributed along the sizing section of the reaming tool body.

Cutting Edge Preparation

All the cutting edges of reaming tools are specialized with the controlled edge radius typically ranging from 5–15μm.

Optimized Flute Geometry

Designed with precisely-ground flutes, our carbide reamers can achieve efficient hole reaming with specialized helix and flute dimensions.

Unequal Pitch Design

Our reamers are designed with unequal pitch, and variable flute spacing delivers uneven tooth arrangement.

Unique Chamfer Design

Versatile chamfer angles and lead lengths are available to suit machining different workpiece materials with different hole tolerances.

Reaming Tool Geometry Breakdown

1.UMG Carbide Substrate

The 0.2μm ultra-fine grain carbide substrates can deliver higher transverse rupture strength and superior durability, enabling edge stability with minimal edge chipping.

2.Multi-Land Margin Design

Precisely ground multi-land margins offer radial guidance, enhancing hole straightness and cylindricity with sizing stability.

3.Cutting Edge Preparation

Micro-honed cutting edges with 5 to 15 μm edge radius can minimize grinding defects and micro-chipping, improving edge strength and wear resistance.

4.Optimized Flute Geometry

The flutes are optimized with engineered flute profiles and sufficient chip space to promote the chip flow and torsional stiffness.

5.Unequal Pitch Design

In reaming applications, unequal pitch design will disrupt harmonic vibration frequencies, greatly decreasing the tool chatter and enhancing hole roundness.

6.Unique Chamfer Design

Precision-ground lead chamfer features optimized chamfer angles, enabling gradual stock removal and decreased cutting impact to enhance dimensional consistency.

Dane techniczne

Podłoże o ultradrobnym ziarnie	0.2μm / 0.4μm / 0.6μm
Tolerancja średnicy cięcia	H6
Powłoka	AlTiN + TiSiN / TiAlSiN-X / AlTiN / TiAlN / TiAlSiN / DLC / AlCrN / AlCrSiN / AlTiSiN / TiSiXN / Dostępne na zamówienie
Numer fletu	6-12
Długość całkowita	50 / 60 / 75 / 100 / 150 / 200 mm / Długość dostosowana do potrzeb
Średnica trzonu	4 / 6 / 8 / 10 / 12 / 14 / 16 / 18 / 20 mm / niestandardowa średnica

Reaming Tool Specifications

Custom Reaming Tool Size Range
Podłoże węglikowe
Szybki przewodnik wyboru
Zalecane parametry cięcia

Tool Category	Series	Standard	Form	Material	Wykończenie powierzchni	Hole Tolerance	Cutting Diameter d1 (mm)	Shank Diameter d2 h6 (mm)	Overall Length l1 (mm)	Length l2 (mm)	Length l4 (mm)	No. of Flutes Z	Shank Tolerance
Rozwiertak maszynowy	DIN 212 Cylindrical Shank Series	DIN 212	Cyl	HSS-E	Bright	H7	1	1	34	15	5.5	3	h6
Rozwiertak maszynowy	DIN 212 Cylindrical Shank Series	DIN 212	Cyl	HSS-E	Bright	H7	1.2	1.2	38	16.5	7.5	3	h6
Rozwiertak maszynowy	DIN 212 Cylindrical Shank Series	DIN 212	Cyl	HSS-E	Bright	H7	1.3	1.3	38	16.5	7.5	3	h6
Rozwiertak maszynowy	DIN 212 Cylindrical Shank Series	DIN 212	Cyl	HSS-E	Bright	H7	1.4	1.4	40	18	8	3	h6
Rozwiertak maszynowy	DIN 212 Cylindrical Shank Series	DIN 212	Cyl	HSS-E	Bright	H7	1.5	1.5	40	18	8	3	h6
Rozwiertak maszynowy	DIN 212 Cylindrical Shank Series	DIN 212	Cyl	HSS-E	Bright	H7	1.6	1.6	43	20	9	3	h6
Rozwiertak maszynowy	DIN 212 Cylindrical Shank Series	DIN 212	Cyl	HSS-E	Bright	H7	1.8	1.8	46	22	10	4	h6
Rozwiertak maszynowy	DIN 212 Cylindrical Shank Series	DIN 212	Cyl	HSS-E	Bright	H7	1.9	1.9	46	22	10	4	h6
Rozwiertak maszynowy	DIN 212 Cylindrical Shank Series	DIN 212	Cyl	HSS-E	Bright	H7	2	2	49	24	11	4	h6
Rozwiertak maszynowy	DIN 212 Cylindrical Shank Series	DIN 212	Cyl	HSS-E	Bright	H7	2.2	2.2	53	25	12	4	h6
Rozwiertak maszynowy	DIN 212 Cylindrical Shank Series	DIN 212	Cyl	HSS-E	Bright	H7	2.3	2.3	53	25	12	4	h6
Rozwiertak maszynowy	DIN 212 Cylindrical Shank Series	DIN 212	Cyl	HSS-E	Bright	H7	2.5	2.5	57	29	14	4	h6
Rozwiertak maszynowy	DIN 212 Cylindrical Shank Series	DIN 212	Cyl	HSS-E	Bright	H7	2.7	2.8	61	33	15	6	h6
Rozwiertak maszynowy	DIN 212 Cylindrical Shank Series	DIN 212	Cyl	HSS-E	Bright	H7	2.8	2.8	61	33	15	6	h6
Rozwiertak maszynowy	DIN 212 Cylindrical Shank Series	DIN 212	Cyl	HSS-E	Bright	H7	2.9	3	61	33	15	6	h6
Rozwiertak maszynowy	DIN 212 Cylindrical Shank Series	DIN 212	Cyl	HSS-E	Bright	H7	3	3	61	33	15	6	h6
Rozwiertak maszynowy	DIN 212 Cylindrical Shank Series	DIN 212	Cyl	HSS-E	Bright	H7	3.2	3.2	65	37	16	6	h6
Rozwiertak maszynowy	DIN 212 Cylindrical Shank Series	DIN 212	Cyl	HSS-E	Bright	H7	3.5	3.5	70	42	18	6	h6
Rozwiertak maszynowy	DIN 212 Cylindrical Shank Series	DIN 212	Cyl	HSS-E	Bright	H7	3.7	3.5	70	42	18	6	h6
Rozwiertak maszynowy	DIN 212 Cylindrical Shank Series	DIN 212	Cyl	HSS-E	Bright	H7	5.5	5.6	93	57	26	6	h6
Rozwiertak maszynowy	DIN 212-2 Cylindrical Shank Series	DIN 212-2	Cyl	HSS-E	Bright	H7	3.8	4	75	47	19	6	h6
Rozwiertak maszynowy	DIN 212-2 Cylindrical Shank Series	DIN 212-2	Cyl	HSS-E	Bright	H7	4	4	75	47	19	6	h6
Rozwiertak maszynowy	DIN 212-2 Cylindrical Shank Series	DIN 212-2	Cyl	HSS-E	Bright	H7	4.4	4.5	80	52	21	6	h6
Rozwiertak maszynowy	DIN 212-2 Cylindrical Shank Series	DIN 212-2	Cyl	HSS-E	Bright	H7	4.5	4.5	80	52	21	6	h6
Rozwiertak maszynowy	DIN 212-2 Cylindrical Shank Series	DIN 212-2	Cyl	HSS-E	Bright	H7	4.7	4.5	80	52	21	6	h6
Rozwiertak maszynowy	DIN 212-2 Cylindrical Shank Series	DIN 212-2	Cyl	HSS-E	Bright	H7	4.9	5	86	58	23	6	h6
Rozwiertak maszynowy	DIN 212-2 Cylindrical Shank Series	DIN 212-2	Cyl	HSS-E	Bright	H7	5	5	86	58	23	6	h6
Rozwiertak maszynowy	DIN 212-2 Cylindrical Shank Series	DIN 212-2	Cyl	HSS-E	Bright	H7	5.1	5	86	58	23	6	h6
Rozwiertak maszynowy	DIN 212-2 Cylindrical Shank Series	DIN 212-2	Cyl	HSS-E	Bright	H7	5.5	5.6	93	57	26	6	h6
Rozwiertak maszynowy	DIN 212-2 Cylindrical Shank Series	DIN 212-2	Cyl	HSS-E	Bright	H7	6	5.6	93	57	26	6	h6
Rozwiertak maszynowy	DIN 212-2 Cylindrical Shank Series	DIN 212-2	Cyl	HSS-E	Bright	H7	6.1	6.3	101	65	28	6	h6
Rozwiertak maszynowy	DIN 212-2 Cylindrical Shank Series	DIN 212-2	Cyl	HSS-E	Bright	H7	6.2	6.3	101	65	28	6	h6
Rozwiertak maszynowy	DIN 212-2 Cylindrical Shank Series	DIN 212-2	Cyl	HSS-E	Bright	H7	6.5	6.3	101	65	28	6	h6
Rozwiertak maszynowy	DIN 212-2 Cylindrical Shank Series	DIN 212-2	Cyl	HSS-E	Bright	H7	6.9	7.1	109	73	31	6	h6
Rozwiertak maszynowy	DIN 212-2 Cylindrical Shank Series	DIN 212-2	Cyl	HSS-E	Bright	H7	7	7.1	109	73	31	6	h6
Rozwiertak maszynowy	DIN 212-2 Cylindrical Shank Series	DIN 212-2	Cyl	HSS-E	Bright	H7	7.1	7.1	109	73	31	6	h6
Rozwiertak maszynowy	DIN 212-2 Cylindrical Shank Series	DIN 212-2	Cyl	HSS-E	Bright	H7	7.2	7.1	109	73	31	6	h6
Rozwiertak maszynowy	DIN 212-2 Cylindrical Shank Series	DIN 212-2	Cyl	HSS-E	Bright	H7	7.4	7.1	109	73	31	6	h6
Rozwiertak maszynowy	DIN 212-2 Cylindrical Shank Series	DIN 212-2	Cyl	HSS-E	Bright	H7	7.5	7.1	109	73	31	6	h6
Rozwiertak maszynowy	DIN 212-2 Cylindrical Shank Series	DIN 212-2	Cyl	HSS-E	Bright	H7	8	8	117	81	33	6	h6
Rozwiertak maszynowy	DIN 212-2 Cylindrical Shank Series	DIN 212-2	Cyl	HSS-E	Bright	H7	8.1	8	117	81	33	6	h6
Rozwiertak maszynowy	DIN 212-2 Cylindrical Shank Series	DIN 212-2	Cyl	HSS-E	Bright	H7	8.3	8	117	81	33	6	h6
Rozwiertak maszynowy	DIN 212-2 Cylindrical Shank Series	DIN 212-2	Cyl	HSS-E	Bright	H7	8.5	8	117	81	33	6	h6
Rozwiertak maszynowy	DIN 212-2 Cylindrical Shank Series	DIN 212-2	Cyl	HSS-E	Bright	H7	9	9	125	85	36	6	h6
Rozwiertak maszynowy	DIN 212-2 Cylindrical Shank Series	DIN 212-2	Cyl	HSS-E	Bright	H7	9.2	9	125	85	36	6	h6
Rozwiertak maszynowy	DIN 212-2 Cylindrical Shank Series	DIN 212-2	Cyl	HSS-E	Bright	H7	9.4	9	125	85	36	6	h6
Rozwiertak maszynowy	DIN 212-2 Cylindrical Shank Series	DIN 212-2	Cyl	HSS-E	Bright	H7	9.5	9	125	85	36	6	h6
Rozwiertak maszynowy	DIN 212-2 Cylindrical Shank Series	DIN 212-2	Cyl	HSS-E	Bright	H7	9.8	10	133	93	38	6	h6
Rozwiertak maszynowy	DIN 212-2 Cylindrical Shank Series	DIN 212-2	Cyl	HSS-E	Bright	H7	9.9	10	133	93	38	6	h6
Rozwiertak maszynowy	DIN 212-2 Cylindrical Shank Series	DIN 212-2	Cyl	HSS-E	Bright	H7	10	10	133	93	38	6	h6
Rozwiertak maszynowy	DIN 212-2 Cylindrical Shank Series	DIN 212-2	Cyl	HSS-E	Bright	H7	10.1	10	133	93	38	6	h6
Rozwiertak maszynowy	DIN 212-2 Cylindrical Shank Series	DIN 212-2	Cyl	HSS-E	Bright	H7	10.5	10	133	93	38	6	h6
Rozwiertak maszynowy	DIN 212-2 Cylindrical Shank Series	DIN 212-2	Cyl	HSS-E	Bright	H7	10.7	10	142	102	41	6	h6
Rozwiertak maszynowy	DIN 212-2 Cylindrical Shank Series	DIN 212-2	Cyl	HSS-E	Bright	H7	11	10	142	102	41	6	h6
Rozwiertak maszynowy	DIN 212-2 Cylindrical Shank Series	DIN 212-2	Cyl	HSS-E	Bright	H7	11.5	10	142	102	41	6	h6
Rozwiertak maszynowy	DIN 212-2 Cylindrical Shank Series	DIN 212-2	Cyl	HSS-E	Bright	H7	12	10	151	111	44	6	h6
Rozwiertak maszynowy	DIN 212-2 Cylindrical Shank Series	DIN 212-2	Cyl	HSS-E	Bright	H7	13	10	151	111	44	6	h6
Rozwiertak maszynowy	DIN 212-2 Cylindrical Shank Series	DIN 212-2	Cyl	HSS-E	Bright	H7	14	12.5	160	115	47	8	h6
Rozwiertak maszynowy	DIN 212-2 Cylindrical Shank Series	DIN 212-2	Cyl	HSS-E	Bright	H7	15	12.5	162	117	50	8	h6
Rozwiertak maszynowy	DIN 212-2 Cylindrical Shank Series	DIN 212-2	Cyl	HSS-E	Bright	H7	16	12.5	170	125	52	8	h6
Rozwiertak maszynowy	DIN 212-2 Cylindrical Shank Series	DIN 212-2	Cyl	HSS-E	Bright	H7	17	14	175	130	54	8	h6
Rozwiertak maszynowy	DIN 212-2 Cylindrical Shank Series	DIN 212-2	Cyl	HSS-E	Bright	H7	18	14	182	137	56	8	h6
Rozwiertak maszynowy	DIN 212-2 Cylindrical Shank Series	DIN 212-2	Cyl	HSS-E	Bright	H7	19	16	189	141	58	8	h6
Rozwiertak maszynowy	DIN 212-2 Cylindrical Shank Series	DIN 212-2	Cyl	HSS-E	Bright	H7	20	16	195	147	60	8	h6

Wielkość ziarna	Funkcja	Odpowiednie materiały	Korzyść
0,2μ	Ultradrobne ziarno, wyjątkowo wysoka twardość, bardzo ostra krawędź tnąca	Stal hartowana (HRC60+), stal nierdzewna, stopy tytanu, narzędzia o mikrośrednicach	Doskonała odporność na zużycie i ostrość krawędzi, idealne do precyzyjnego wykańczania, ale mniejsza wytrzymałość
0,4μ	Ultradrobne ziarno, doskonała równowaga między twardością a wytrzymałością	równowaga twardości i wytrzymałości Stal hartowana, stal nierdzewna, stal stopowa, stal do form precyzyjnych	Wysoka odporność na zużycie i dobra stabilność krawędzi, nadaje się do obróbki wykańczającej i półwykańczającej
0,6μ	Drobnoziarnista, zrównoważona wydajność	Stal węglowa, stal stopowa, stal nierdzewna, żeliwo (warunki ogólne)	Dobra równowaga między odpornością na zużycie a wytrzymałością, wszechstronny gatunek ogólnego przeznaczenia
0,7μ	Ziarno średnio-drobne, lepsza wytrzymałość	Stal ogólna, stal niskostopowa, warunki cięcia przerywanego	Lepsza odporność na wykruszanie, nadaje się do obróbki półzgrubnej i niestabilnego cięcia
0,8μ	Średnioziarniste, o wysokiej wytrzymałości	Stal niskowęglowa, obróbka zgrubna, ciężkie skrawanie przerywane	Wysoka odporność na uderzenia, odpowiednia do obróbki zgrubnej i wymagającej stabilności cięcia

Przybory		Materiały obrabiane	Typ
ISO
P	P1	Stal automatowa	UP/UT/UK/UM/US/UHT/UR/S65/S60/S58/S55/SM/SEU/SR
	P2	Stal niskowęglowa (C<0,25%)
	P4	Stal średniowęglowa (0,25%), Stal niskostopowa
	P5	Stal stopowa, stal hartowana i odpuszczana
	P6	Stal wysokowęglowa (C>0,6%)
	P11	Stal nierdzewna ferrytyczna, stal nierdzewna martenzytyczna
H	H5	Stal hartowana i odpuszczana	UP/UH/UT/UK/UM/UHT/UR/S68/S65/SEU
	H7	Stal łożyskowa
	H8	Stal narzędziowa, stal szybkotnąca
	H12	Hartowana stal nierdzewna
	H21	Stal ocynkowana
M	M1	Stal nierdzewna austenityczna	UP / UK / UM / US / UR / S65 / S60 / S58 / SM / SEU
	M2	Stal nierdzewna austenityczna o wysokiej wytrzymałości
	M4	Stal nierdzewna duplex
S	S1	Superstop na bazie żelaza	UM / US / UR / SM
	S2	Superstop na bazie kobaltu
	S3	Superstop na bazie niklu
	S11	Stop tytanu (stop niskostopowy)
	S13	Stop tytanu (wysokostopowy)
K	K1	Żeliwo szare	UP/UK/UM/UR/S65/S60/S58/S55/SEU/SR
	K2	Żeliwo grafitowe (CGI)
	K3	Żeliwo ciągliwe
	K4	Żeliwo sferoidalne
N	N1	Stop aluminium i krzemu, zawartość krzemu <9%	UA / SA / SR
	N2	Stop krzemu i aluminium, 9%
	N3	Stop krzemu i aluminium, zawartość krzemu >16%
	N4	Odlew ze stopu aluminium
	N5	Stop aluminium kuty
	N10	Miedź
	N11	Stop miedzi

ISO	Materiały obrabiane	Materiały obrabiane	Brinell Hardness HB	Rockwell Hardness HRC	Coolant Type	Cutting Speed Vc (m/min)	Drill Bits Diameter d (mm) – 3	Drill Bits Diameter d (mm) – 4	Drill Bits Diameter d (mm) – 6	Drill Bits Diameter d (mm) – 8	Drill Bits Diameter d (mm) – 10	Drill Bits Diameter d (mm) – 12	Drill Bits Diameter d (mm) – 14	Drill Bits Diameter d (mm) – 16	Drill Bits Diameter d (mm) – 18	Drill Bits Diameter d (mm) – 20
P1	Steel Parts	Stal automatowa	<125	–	External/Internal Coolant	90	100	0.07	0.1	0.13	0.16	0.18	0.2	0.22	0.25	0.28
P2	Steel Parts	Low Carbon Steel (C≤0.25%)	<125	–	External/Internal Coolant	90	100	0.07	0.1	0.13	0.16	0.18	0.2	0.22	0.25	0.28
P4	Steel Parts	Medium Carbon Steel (C>0.25%)	<220	<25	External/Internal Coolant	85	100	0.07	0.1	0.13	0.16	0.18	0.2	0.22	0.25	0.28
P5	Steel Parts	Stal niskostopowa	<220	<25	External/Internal Coolant	85	100	0.07	0.1	0.13	0.16	0.18	0.2	0.22	0.25	0.28
P5	Steel Parts	Stal stopowa, stal hartowana i odpuszczana	<330	28-35	External/Internal Coolant	85	100	0.07	0.1	0.13	0.16	0.18	0.2	0.22	0.25	0.28
P6	Steel Parts	High Carbon Steel (C>0.6%)	370-450	45-65	–	–	–	–	–	–	–	–	–	–	–	–
P11	Steel Parts	Ferritic Steels/ Martensitic Stainless Steels	250-250	38-50	External/Internal Coolant	60	60	0.07	0.1	0.12	0.14	0.16	0.18	0.2	0.22	0.24
H5	Hardened Materials	Stal hartowana i odpuszczana	–	35-40	External/Internal Coolant	45	60	0.07	0.1	0.12	0.14	0.16	0.18	0.2	0.22	0.24
H7	Hardened Materials	Stal łożyskowa	–	55-64	–	–	–	–	–	–	–	–	–	–	–	–
H8	Hardened Materials	Stal narzędziowa, stal szybkotnąca	–	38-64	–	–	–	–	–	–	–	–	–	–	–	–
H12	Hardened Materials	Hartowana stal nierdzewna	–	33-50	External/Internal Coolant	45	45	0.05	0.06	0.08	0.11	0.13	0.15	0.17	0.18	0.19
H21	Hardened Materials	Stal ocynkowana	–	35-64	–	–	–	–	–	–	–	–	–	–	–	–
M1	Stal nierdzewna	Stal nierdzewna austenityczna	<150	–	External/Internal Coolant	60	60	0.07	0.1	0.12	0.14	0.15	0.18	0.2	0.22	0.24
M2	Stal nierdzewna	Stal nierdzewna austenityczna o wysokiej wytrzymałości	150-230	–	External/Internal Coolant	55	55	0.07	0.1	0.12	0.14	0.15	0.18	0.2	0.22	0.24
M4	Stal nierdzewna	Stal nierdzewna duplex	135-275	–	External/Internal Coolant	45	45	0.05	0.06	0.08	0.11	0.13	0.15	0.17	0.18	0.19
S1	Heat & Titanium Alloy	Superstop na bazie żelaza	160-260	25-48	–	25	–	0.04	0.05	0.06	0.08	0.1	0.12	0.14	0.15	0.16
S2	Heat & Titanium Alloy	Superstop na bazie kobaltu	250-450	25-48	–	25	–	0.04	0.05	0.06	0.08	0.1	0.12	0.14	0.15	0.16
S3	Heat & Titanium Alloy	Superstop na bazie niklu	160-450	–	–	25	–	0.04	0.05	0.06	0.08	0.1	0.12	0.14	0.15	0.16
S11	Heat & Titanium Alloy	Stop tytanu (stop niskostopowy)	250-350	33-38	–	40	–	0.05	0.06	0.08	0.11	0.13	0.15	0.17	0.18	0.19
S13	Heat & Titanium Alloy	Stop tytanu (wysokostopowy)	300-400	36-48	–	32	–	0.04	0.05	0.06	0.08	0.1	0.12	0.14	0.15	0.16
K1	Lane żelazo	Żeliwo szare	120-290	<32	External/Internal Coolant	90	100	0.07	0.1	0.13	0.16	0.18	0.2	0.22	0.25	0.28
K2	Lane żelazo	Compacted Graphite Iron (CGI)	120-290	<32	External/Internal Coolant	90	100	0.07	0.1	0.13	0.16	0.18	0.2	0.22	0.25	0.28
K3	Lane żelazo	Żeliwo ciągliwe	130-260	<28	External/Internal Coolant	90	100	0.07	0.1	0.13	0.16	0.18	0.2	0.22	0.25	0.28
K4	Lane żelazo	Żeliwo sferoidalne	180-350	<43	External/Internal Coolant	70	80	0.07	0.1	0.13	0.16	0.18	0.2	0.22	0.25	0.28

How JINOO Manufactures Reaming Tool?

Precyzyjne szlifierki CNC

WALTER Helitronic Power 400L
WALTER Helitronic Vision 400L
WALTER Helitronic Micro 400L
Rollomatic NP5
ANCA MX5
ANCA MX7

German machinery is the strong manufacturing foundation of JINOO. We have introduced the professional production ecosystem to manufacture high-quality reaming tools. Advanced 5-axis CNC grinding machines can boost high-volume manufacturing with tight tolerances.

Wyślij zapytanie teraz

Zaawansowany system kontroli jakości

1. ZOLLER G3 Tool Measurement: Applied for the comprehensive verification of the reamer geometry, dimensional consistency, and flute symmetry with measurement tolerances within ±2 μm.

2. PG1000 Optical Inspection: Utilized for the microscopic optical inspection of cutting edges and coating conditions of reaming tools to avoid potential defects.

3. Parlec Tool Presetting: Used for inspecting the final tool assembly and machine-side simulation to ensure reamer length accuracy and controlled runout values.

We have formed a professional quality inspection system to ensure 100% quality verification of our reaming tools. In addition, JINOO has employed the ERP system to monitor every manufacturing stage.

Wyślij zapytanie teraz

Materiał narzędziowy z węglika spiekanego drobnoziarnistego

We source fine-grain carbide tool material from well-renowned raw material suppliers like GESAC, Kennametal, Sandvik, Gühring, and CB Ceratizit.
Featuring high-hardness carbide substrates, our reaming tools can last longer than standard reamers with excellent durability and wear resistance.

JINOO can ensure you 10% to 12% cobalt content in our tungsten carbide.

Wyślij zapytanie teraz

JINOO Virgin Carbide vs Recycled Carbide

Węglik pierwotny zamiast węglika z recyklingu

JINOO’s Virgin Carbide used in our reaming tools:

Higher consistency
Superior rigidity
Fine grains
Uniform cobalt distribution
Bez zanieczyszczeń
Dense structure

Gorszy od konkurencji węglik spiekany z recyklingu:

Unstable tool rigidity
Lower wear resistance.
Wiele zanieczyszczeń
Luźna struktura
Low density
Krótka żywotność narzędzia

Wyślij zapytanie teraz

Niezawodni partnerzy w zakresie powłok

JINOO uses advanced coating technology from Oerlikon Balzers in Switzerland for our reaming tools.
Combined with durable coatings, our reaming tools can extend their tool life under high-volume production to decrease tool changes.
We can customize reaming tools with the most suitable coating to suit your machining requirements.

Wyślij zapytanie teraz

Wysokiej jakości powłoka kontra powłoka gorszej jakości

Powłoka o wysokiej wydajności kontra powłoka niskiej jakości

Wysokiej jakości powłoki used in our reaming tools:

Extend their tool life
High density
High purity
Uniform thickness
Stable tolerance
Brak porów i zanieczyszczeń

Competitor’s inferior coatings used in low-grade drill bits:

Many pinholes and cracks
Uneven thickness
Prone to oxidation
Luźna struktura
Rough surface
Unstable performance

Wyślij zapytanie teraz

System Zarządzania Jakością ISO 9001

Certyfikat ISO9001:2008
Certyfikat ISO9001:2015
Producent kwalifikowany SGS
Producent posiadający certyfikat TÜV Rheinland
Alibaba.com Zweryfikowany dostawca
Zweryfikowany dostawca Made-in-China
1688 platform Zweryfikowany dostawca
Narodowe Przedsiębiorstwo High-Tech
Certyfikacja produktów high-tech w Changzhou

JINOO has obtained many international certifications, and we are also a verified supplier on Alibaba and Made-in-China with a high reputation for consistent quality standards.

Wyślij zapytanie teraz

Wsparcie techniczne i optymalizacja narzędzi

JINOO has obtained many international certifications, and we are also a verified supplier on Alibaba and Made-in-China with a high reputation for consistent quality standards.

Wyślij zapytanie teraz

Referencje

” JINOO is a reliable, solid carbide reamer supplier in China. Their custom reaming tools are the perfect choice to be combined with carbide drill bits. I have bought over 10 thousand carbide reamers from JINOO, and their quality has always come with precision. I highly recommend you try JINOO’s reaming tools for CNC machining to increase your productivity. “
Bob Bain
CEO

FAQ about Reaming Tools

Do you provide customized services of reaming tools?

Of course! We furnish non-standard customization beyond standard sizes according to your personalized needs. Factors such as processing materials, diameter and the choice of coating of JINOO’s carbide reamers can all be modified to meet your exacting requirements. We will provide you with cutting-edge solutions to ensure an exceptional user experience.

What is your MOQ (Minimum Order Quantity) of solid carbide reamers?

If you want JINOO to customize solid carbide reamers for you, there’s generally no minimum order quantity as they are non-standard tools, and even a small order can be accepted.

What payment methods do you accept for reaming tools?

The payment method of our CNC reaming tools can be flexible; we usually accept bank transfer, credit card, and PayPal. If you have other requirements about the payment method, we can modify it based on your order.

How to choose the types of reaming tools for machining?

For various reaming tools suitable for different application scenarios, clients must identify the most suitable one for specific machining requirements.

The automotive and aerospace industries

Reaming tools for the automotive industry are expected to achieve tight hole tolerances in machining crankcases, engine blocks, and transfer cases with H6-H7 grade hole accuracy. Our solid carbide reamer has a long lifespan and high reliability in mass production, which is suitable for automobiles of fixed diameter and batch processing.

Internal coolant reamer is more frequently used in manufacturing aerostructure components and engine blocks, especially suitable for deep spiritual machining.

The die-mold industry

Reaming tools for mold and die require machining deep blind holes and complex hole patterns, enabling higher machining stability with flexibility. Therefore, the spiral and straight reamer is a good choice.

The energy and automotive sector

The modular and replaceable reamer is suitable for the energy and automotive sector, as it is used for the large-scale machining area, saving time for effective machining.

What is the main purpose of reaming?

Carbide reaming tools are important tools used during high-speed reaming, combined with drilling tools to achieve more precise machining.

There are three key ways in which you can use the remaining tools:

Improve hole accuracy

Enable the improvement of hole accuracy after being drilled to achieve a more precise size with better tolerances.

Improve the hole’s surface finish

CNC reaming tools, like a reamer, can effectively remove the machining marks left on the hole, enabling the hole wall to achieve a higher roughness grade (e.g., Ra ≤ 0.8μm).

Fix the hole geometry

This can effectively improve hole roundness and straightness, which are highly used in machining crankshafts and positioning the hole.

How to properly ream a hole?

You should first use drill bits with smaller diameters to create pre-drilled holes. To achieve optimal surface finish quality, use high-performance solid carbide reamers with proper spindle speeds and feed rates. Remember to use sufficient cutting fluid to promote the chip flow and extend the tool lifespan. Moreover, keep alignment between reamers and the hole axis to prevent tool vibration and oversized holes. Correct reaming techniques can ensure the creation of high-precision holes and excellent hole accuracy.

What is the difference between a reamer and a drill bit?

Carbide reamers and drill bits are different in their function and precision. Drill bits are typically used for drilling initial holes with high material removal rates, while carbide reamers are used for enlarging and smoothing holes to achieve high dimensional accuracy. Solid carbide reamers can deliver superior precision and tighter tolerances than conventional twist drills. We recommend you use drill bits with CNC reaming tools for high-accuracy hole machining to optimize surface finish quality.

How does a reamer cut?

Solid carbide reamers are designed with several flutes to remove a small amount of material from the pre-drilled hole surfaces. Compared with drill bits, carbide reamers focus on precision machining with minimal material removal. Straight or helical flutes can promote smooth chip evacuation with superior hole roundness. Solid carbide reamers are extensively used for hole finishing in aluminum and steel parts.

Skontaktuj się z naszym działem sprzedaży lub zaloguj się, aby poznać wszystkie dostępne opcje cenowe.

CONTACT JINOO TOOLS NOW

O NAS

JINOO Tools Group is a “National High-Tech Enterprise”, which was founded in 2006 and specializes in manufacturing high-precision solid carbide cutting tools, including reaming tools， with over 25,000㎡ manufacturing bases. We are also a professional reaming tool manufacturer with reamers widely used in the automotive, aerospace, and equipment manufacturing industries. We have accumulated over 50 national patents, devoted to creating high-value cutting solutions for our customers.

Przeczytaj więcej